Re: Low cathode resistor bias - MIchael Samra

Tube DIY Asylum

Do It Yourself (DIY) paradise for tube and SET project builders.

Follow Ups Full Thread

Topic - Low cathode resistor bias - Doug Flynn 21:47:01 07/16/05 (43)

Re: Low cathode resistor bias - J Epstein 05:29:13 07/18/05 (0)

Re: Low cathode resistor bias - Ray Moth 23:00:48 07/17/05 (0)

Another way to look at this - BBeck 06:31:16 07/17/05 (0)

Re: Low cathode resistor bias - MIchael Samra 01:19:10 07/17/05 (29)

Re: Low cathode resistor bias - Ray Moth 17:51:20 07/18/05 (7)

"solely"? Nope. - Joelt 05:12:09 07/19/05 (6)

Re: "solely"? Nope. - Ray Moth 06:30:21 07/19/05 (5)

Re: "solely"? Nope. - Joelt 07:00:40 07/19/05 (4)

Re: "solely"? Nope. - Ray Moth 19:56:39 07/20/05 (0)

Have to disagree on this one - Triode_Kingdom 08:32:56 07/19/05 (2)

Re: Have to disagree on this one - Joelt 08:43:07 07/19/05 (1)

Not good enough - Triode_Kingdom 12:29:45 07/19/05 (0)

Re: Low cathode resistor bias - jdarg 13:54:14 07/18/05 (12)

Re: Low cathode resistor bias - MIchael Samra 07/19/0510:32:39 07/19/05 (0)

Re: Low cathode resistor bias - Joelt 05:09:02 07/19/05 (10)

Re: Low cathode resistor bias - MIchael Samra 10:33:24 07/19/05 (0)

15.6 ohms was used.... - Russ57 07:09:31 07/19/05 (8)

Re: 15.6 ohms was used.... - dave slagle 19:21:22 07/19/05 (0)

Re: 15.6 ohms was used.... - Joelt 07:44:44 07/19/05 (6)

Re: 15.6 ohms was used....The way its figured is - MIchael Samra 17:14:28 07/19/05 (0)

Page 10, last two paragraphs, of the Dynaco 70 assembly instructions - Russ57 10:14:43 07/19/05 (3)

Re: Page 10, last two paragraphs, of the Dynaco 70 assembly instructions - Kyle K 11:20:30 07/19/05 (2)

And all intended to give a voltage of 1.56VDC(nt) - Russ57 12:17:45 07/19/05 (1)

Bingo! (nt) - Kyle K 12:46:41 07/19/05 (0)

Re: 15.6 ohms was used.... - Kyle K 10:09:51 07/19/05 (0)

Not sure what you mean - Mark Kelly 18:39:52 07/17/05 (0)

Dynaco: it's not "low cathode resistor bias". - Joelt 04:30:37 07/17/05 (6)

IM - Triode_Kingdom 11:13:21 07/17/05 (5)

Re: IM - Dave Cigna 14:07:09 07/17/05 (2)

Re: IM - Homer Jay 15:41:45 07/17/05 (1)

Well in that case...Nevermind. :) (nt) - Triode_Kingdom 23:56:30 07/17/05 (0)

Re: IM - Joelt 12:53:53 07/17/05 (1)

Re: IM, CMR - drlowmu 22:13:52 07/18/05 (0)

Re: Low cathode resistor bias - Paul Barker 23:30:27 07/16/05 (9)

Hot stuff! - Brian C. 10:50:02 07/17/05 (7)

Re: Hot stuff! - Paul Barker 11:13:59 07/17/05 (6)

Re: Hot stuff! - Brian C. 13:45:21 07/17/05 (5)

Re: Hot stuff! - Paul Barker 23:29:37 07/17/05 (4)

Yes, I remember... - Brian C. 03:04:16 07/18/05 (3)

Re: Yes, I remember... - Paul Barker 04:14:37 07/18/05 (2)

Re: Yes, I remember... - dave slagle 18:36:50 07/18/05 (1)

Re: Yes, I remember... - Paul Barker 22:53:26 07/18/05 (0)

Re: Low cathode resistor bias - Paul Barker 07:38:58 07/17/05 (0)

Follow Ups

Re: Low cathode resistor bias - MIchael Samra 07/19/0510:32:39 07/19/05 (0)