|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: Re: Converting Eico HF-81 to 3-wire Power Cord posted by throbbinnut on July 7, 2005 at 11:29:03:
Thanks . . . One more question . . . The amp will be used with both grounded outlets and non-grounded outlets that will nevertheless accept a 3 prong plug. Am I correct to assume that in this case I should leave the cap in and also use a 3-wire cord?OK . . . one more . . . just to clarify some previous advice given to me. I have both .022uf and .047uf versions of these suppression caps. (They would be replacing the .03uf 600v stock cap which was way out of spec by the way) When I asked on the Vintage board I was told that using the .022 would provide more safety than the .047 - assuming that the chassis is not grounded using a 3rd wire. Is this correct? I just want to make this as safe as possible. Thanks . . . Charlie
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Another Question - FlaCharlie 07/7/0513:35:14 07/7/05 (1)
- Re: Another Question - throbbinnut 07:49:11 07/8/05 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
