|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: Grid Stoppers MUST be Carbon Comp posted by Triode_Kingdom on July 24, 2016 at 11:18:29:
The image below is from the Vishay datasheets. It says "Conceptual Illustration," but the actual construction is likely to be similar. Note that the path length is much longer than in a carbon comp resistor with a solid body. This additional length creates inductance. Also, you can believe that their claim regarding cancellation of mutual inductance cannot be taken at face value where RF is involved. At higher frequencies, these resistors will not behave like a straight piece of wire.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Vishay RNC90Y - Triode_Kingdom 07/24/1611:29:29 07/24/16 (1)
- Also... - FenderLover 17:58:36 07/24/16 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
