Eico HF-8X Input / Grid Resistors

Tube DIY Asylum

Do It Yourself (DIY) paradise for tube and SET project builders.

I have two more questions related to my HF-8X project:
1. The HF-86 schematic on the Triode site shows a 10K resistor on the grid of the 12AX7 section of the 7247. What is its function? Is the value 10K magic in this application?
2. In order to use a single 12AU7 for gain and phase-splitter, I'm thinking of swapping in the final gain and phase-splitter stages of the HF-81 shown in this schematic . The input section of the gain stage would then go input jack -> 100K pot -> [something] -> grid of one section of the 12AU7. What should that [something] be? A 10K resistor as in the HF-86 circuit?
Thanks very much,
-uW

This post is made possible by the generous support of people like you and our sponsors:

Schiit Audio

Topic - Eico HF-8X Input / Grid Resistors - uW 11:53:52 12/30/02 (2)

That Input Grid Resistor - Tiny Daddy 12:09:16 12/30/02 (1)

Thanks! <nt> - uW 12:24:57 12/30/02 (0)

You can not post to an archived thread.