This is what should be using for the first cap off the GZ34

Tube DIY Asylum

Do It Yourself (DIY) paradise for tube and SET project builders.

I use the 35uf at 500 poly but I tell you it makes a big difference..I actually use zn all film cap power supply in the Eicos because there isn't much to begin with and the difference it makes is unbelievable..I actully use a 51uf solen can on the hf60s but the HF35s the 30uf works..Put another one down stream and then glue one underneath and enjoy.
"For every complex problem there is an answer that is clear, simple, and wrong" H. L. Mencken

http://www.ebay.com/itm/30-uf-600V-Capacitors-ELECTRONIC-CON (Open in New Window)

This post is made possible by the generous support of people like you and our sponsors:

Follow Ups Full Thread

Topic - Eico HF-35 filaments, hum, grounding, etc. - D. McAllister 00:02:49 08/5/13 (10)

RE: Eico HF-35 filaments, hum, grounding, etc. - elflow 07:44:22 08/7/13 (0)

RE: Eico HF-35 filaments, hum, grounding, etc. - Caucasian Blackplate 16:08:46 08/5/13 (2)

Eico HF-35 filaments, hum, grounding, etc. - D. McAllister 19:02:11 08/5/13 (1)

RE: Eico HF-35 filaments, hum, grounding, etc. - Caucasian Blackplate 19:08:03 08/5/13 (0)

Depending on how loud the hum is,there are a couple questions. - Michael Samra 08:55:59 08/5/13 (5)

Eico HF-35 filaments, hum, grounding, etc. - D. McAllister 19:06:58 08/5/13 (4)

If you are leaking DC on any of the couplers,that can cause hum. - Michael Samra 19:23:23 08/5/13 (3)

RE: If you are leaking DC on any of the couplers,that can cause hum. - D. McAllister 20:14:25 08/5/13 (2)

This is what should be using for the first cap off the GZ34 - Michael Samra 08/5/1321:12:32 08/5/13 (0)

RE: If you are leaking DC on any of the couplers,that can cause hum. - Michael Samra 20:26:11 08/5/13 (0)

Follow Ups

This is what should be using for the first cap off the GZ34 - Michael Samra 08/5/1321:12:32 08/5/13 (0)

Post a Message!