|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: Sacrilige!!!! get the torches posted by Sector-7G on November 20, 2002 at 20:26:14:
Doug,Here's the quote from Doc Hoyer:
"I wound your (Citation II output) transformer last night, laminated it, and put it on the test jig with 500 volts on the supply side and drove it all the way up to 100 watts, down to 20 cycles. Then I went for the rated 60 watt level from 10 to 100,000 cycles. At 10 cycles it was down 1.74 DB, minus .28 DB at 15 cycles, minus
0.12 DB at 20 cycles, stayed almost flat to 50,000 and slowly dropped to -2.9 DB at 100,000 cycles - all with no feedback as this is a jig driven by a perfect amplifier - perfectly flat."Amazing stuff!
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Sacrilige!!!! get the torches - Jim McShane 11/20/0220:45:51 11/20/02 (1)
- Stop encouraging him - Sector-7G 05:36:46 11/21/02 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
