|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: One thing to consider... posted by Scholl on August 27, 2002 at 03:58:18:
Interesting post by Scholl - but why should this be such a huge issue? As long as the draw is somewhere between 10 and 12v on the cathode, the valve should be within operating conditions. Obviously matching is going to help, but surely it's not a fine art? I spoke to the ex-Beard designer (Chris Found) about this and he said that while in later models Beard did fit regulators under the EL84s, the main thing was to get a good matching set of valves. He also said that he'd seen the same set of valves last ten years without problems. Can you expand on where the difficulty is - I'm interested in your experience? Andy
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Biasing multiple EL84s - andy evans 08/27/0208:30:45 08/27/02 (2)
- Commercial compromise. - EL84 00:48:10 08/28/02 (0)
- Re: Biasing multiple EL84s - Scholl 14:22:40 08/27/02 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
