|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: RE: Has anyone found a REAL substitute for the ECQ-P? posted by Jim McShane on December 9, 2008 at 05:18:19:
I read in one of your posts that you like to place tin and PP caps in lower level signal coupling positions and PIOs before the outputs. Is this still common practice for you?
I have a Dyna '70 with a Triode eel EF86 driver that uses tin and PP caps in the first stage but K40s before the EL34s. It sounds pretty righteous. I have some .01uF Vitamin Qs that would fit in place of the tin/PPs, but am enjoying the way it sounds now.
I just purchased an Eico HF-87. I'll try both combinations in that amp - the point to point wiring in a big, open chassis will allow much quicker swaps.
Adam
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- On plastic caps - - LowRedMoon 12/9/0822:00:20 12/9/08 (1)
- RE: On plastic caps - - Jim McShane 05:34:12 12/10/08 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]