In Reply to: RE: Vf vs If for Cree Sic Schottky Diode - Measured at cathode-relevant Currents posted by Naz on July 8, 2009 at 16:49:11:
I think the Crees are probably close in specs to the ones you are using, as their dynamic resistance also drops dramatically as current increases. At the 10mA current range, both are lower than LEDs. The advantage of the SiC is their higher Vf, so less need to be used in a stack. Since I'm moving to a CCS, it should minimize the impact of dynamic resistance anyway.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Vf vs If for Cree Sic Schottky Diode - Measured at cathode-relevant Currents - Maxamillion 07/8/0920:18:00 07/8/09 (0)