|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: LCR Schematic posted by ecc83 on October 3, 2005 at 01:29:37:
Hi,Be aware that if you build a RIAA exactly according to the schematic it may not be as accurate as you wish.
As I was pulled in in getting the S&B RIAA Modules to work well I know what is involved. Each S&B RIAA actually has the individual inductors trimmed accuratly in circuit using a Lindos computereised testset (which has the RIAA curve build in and thus gives quick and accurate feedback) and in order to get chokes that kept their inductance sufficiently equal from well below 20Hz to well above 20KHz quite a bit of work was needed.
There is a french website (http://preyale.melaudia.net/lcr600riaa.php) that has instruction on winding your own inductors, have fun, but given the performance of their homegrown autoformer volume control I would suggest to limit expectations.
Ciao T
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: LCR Schematic - Thorsten 10/3/0505:45:42 10/3/05 (1)
- Re: LCR Schematic - ecc83 07:45:27 10/3/05 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
