|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: Re: Best Driver Stage for a 10/10Y posted by JLH on November 5, 2001 at 13:22:20:
3.) I meant the coupling cap versus the bypass cap that sets the reference for the output tubes cathode. I thing we are talking the same thing here.4.) See "monkey boy's" pointers on the tubes which are really intended to be common grid. I think the biggie here is the low value of the grid resistor. BTW: j it really doesn't matter whether it is the source or the grid resistor which provides the low impedance path to ground, as I'm sure you know, the trouble is the length of the path, or loop, and what bisects it, if you will.
5.) 425 V p-k at 35mA, max dissipation.
This is a nice exchange BTW
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Best Driver Stage for a 10/10Y - larry moore 11/6/0107:29:02 11/6/01 (1)
- Just to clarify - source or grid R - J Epstein 08:34:27 11/6/01 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
