|
SET Asylum Single Ended Triodes (SETs), the ultimate tube lovers dream. |
|
|
|
SET Asylum Single Ended Triodes (SETs), the ultimate tube lovers dream. |
|
In Reply to: 45's in AES SE-1? posted by 2unZ on May 11, 2002 at 11:24:19:
> > I believe the AES SE-1 works with 45's and a bias of 90mA. Curious if you tried it? < <No way! Recommended operating current is 36mA, and a max 10W plate dissipation. At 90mA you had better keep the plate voltage biased to 110V or under. That'll provide about 0.5W if you do so. That's non-optimal for all 45's, including the Vaic, by a long margin, unless I'm missing something interesting here when 0.5W will do. But 90mA is hard on the tube at any voltage.
Kurt
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: 45's in AES SE-1? - Kurt Strain 05/11/0219:31:18 05/11/02 (11)
- Re: 45's in AES SE-1? - Charlie G 14:13:14 05/12/02 (0)
- 45's in AES SE-1... what's a PP amp doing with the label SE-1? nt - Kurt Strain 23:03:48 05/12/02 (0)
- It's really SE. I guess they tie both cathodes together and bypass everything. nt - Kurt Strain 23:07:17 05/12/02 (0)
- Re: It's really SE. I guess they tie both cathodes together and bypass everything. nt - Charlie G 12:28:16 05/13/02 (0)
- Common tied cathodes have been done before and provide 2X bias current.. - Kurt Strain 13:57:15 05/13/02 (0)
- Re: Common tied cathodes have been done before and provide 2X bias current.. - dave slagle 19:16:58 05/13/02 (2)
- That'll never work! - J Epstein 09:41:23 05/14/02 (0)
- I'd better be carefull here... - Charlie G 21:56:34 05/13/02 (0)
- Re: Common tied cathodes have been done before and provide 2X bias current.. - dave slagle 19:16:17 05/13/02 (0)
- What kind of life expectancy, in general, - John PA 13:59:17 05/12/02 (0)
- opt for pp2A3 and pp45? - gonefishin 21:26:14 05/11/02 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
