|
SET Asylum Single Ended Triodes (SETs), the ultimate tube lovers dream. |
|
|
|
SET Asylum Single Ended Triodes (SETs), the ultimate tube lovers dream. |
|
In Reply to: Re: Forums like this can be brutal!! posted by jeff mai on May 31, 2001 at 15:48:21:
Western electric used measurements, not calculations for their specs. That is what I did. Using a low distortion driver and very conservative output tranny means very low distortion which does not affect the outcome of the tests. Thus apples to apples.
If the design of the DHT amps could have low distortion, then they should have done it instead of continually hiding the specs.
The printed curves are very general and not nearly good enough to determine specs. Just a couple of mils off because of interpolation means the calculations are way off.
By the way, how did Western Electric drive the 300b to get the specs. with a low distortion driver circuit. That is what I did.
This is my last reply on the subject. Take care.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Forums like this can be brutal!! - Steve 06/4/0102:03:25 06/4/01 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
