I have an issue with a P500 that I just purchased used. For some reason the voltage from turn-on is coming up very slowly, and then finally stopped at 62 V output between hot and neutral. I measured from hot to ground, and the measurement was 38.5 volts, and neutral to ground measured 23.5 V.
Any ideas on what might be the issue? I have the settings at Sine, 60 HZ, 120V, nothing out of the ordinary. The unit I have is a 120 V model, and my wall voltage fluctuates between 120-123 V.
Thanks for any help!
This post is made possible by the generous support of people like you and our sponsors:
Topic - P500 Issue - kevb 17:33:25 10/14/10 (1)
- RE: P500 Issue - PaulMC 15:10:46 10/19/10 (0)