|
Propeller Head Plaza Technical and scientific discussion of amps, cables and other topics. |
|
|
|
Propeller Head Plaza Technical and scientific discussion of amps, cables and other topics. |
|
In Reply to: Re: Some Sziklai follower results posted by Scott Frankland on July 21, 2003 at 23:11:02:
Hi Scott,> Basically everything above H3 is at -135dB (or thereabouts).
That's why the 3rd column...to show that the ultimate resolution
measured straight out of the signal source is -190dB!The -135dB (measured at the output) represents a collective
average where there are so many harmonics so close together,
they all combine into what looks like a bumpy but fairly even
distribution of low level magnitude harmonics, all at about
-135dB.> I would try loading down the circuit to invoke something more
> realistic.We know that loading down an emitter follower will invoke more
static distortion...the question is how do you invoke TIM
(dynamic) distortion?
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Some Sziklai follower results - mfc 07/22/0310:12:37 07/22/03 (1)
- Re: Some Sziklai follower results - Scott Frankland 10:36:08 07/22/03 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
