75 Ohm BNC rules!

75 Ohm BNC rules!

Posted by Ivan303 (A) on December 13, 2017 at 19:37:57

So I replaced the 50 Ohm BNC male to BNC male adapter that attaches the Raspberry Pi/ALLO DigiOne to my DAC as pictured below with a 75 Ohm adapter as picture above:

Did it make a difference?

Of course it did!

Can I hear that difference?

That's a different question! =:-0

Certainly an $8 improvement.

Allo/Pi is sounding pretty darn good, even when compared to the MicroRendu WITH LPS-1 UltraCap and Canare StarQuad DC cable.

Still need to cobble together a Canare cable for the Cheap Chinese LPS running the Pi.

Then... We're done. :-(

First they came for the dumb-asses
And I did not speak out
Because I was not a dumb-ass

This post is made possible by the generous support of people like you and our sponsors:

Topic - 75 Ohm BNC rules! - Ivan303 19:37:57 12/13/17 (25)

RE: 75 Ohm BNC rules! - Chris Garrett 22:00:06 12/14/17 (2)

I think in this case, using a 75 Ohm BNC to BNC connector... - Ivan303 10:50:55 12/16/17 (0)

RE: 75 Ohm BNC rules! - AbeCollins 23:22:45 12/14/17 (0)

it sure does - lokie 05:07:02 12/14/17 (18)

RE: it sure does - AbeCollins 09:17:03 12/14/17 (8)

RE: it sure does - lokie 10:47:36 12/14/17 (7)

I could be wrong... - Ivan303 16:36:22 12/14/17 (5)

Agree - lokie 17:07:43 12/14/17 (2)

Note that - E-Stat 07:07:27 12/15/17 (0)

The Sonore Signature SE has I2S... - Ivan303 17:31:32 12/14/17 (0)

Good point about USB.... - AbeCollins 16:44:28 12/14/17 (1)

My DAC doesn't do DSD anyway... - Ivan303 17:33:29 12/14/17 (0)

RE: it sure does - AbeCollins 12:36:47 12/14/17 (0)

USB is DAC dependent... - Ivan303 07:17:12 12/14/17 (8)

Audiogd - Dynobot 10:29:40 12/14/17 (2)

Lucky you... - Ivan303 16:23:41 12/14/17 (1)

RE: Lucky you... - Dynobot 17:11:19 12/14/17 (0)

"USB is DAC dependent" uh...No kidding captain obvious. - lokie 08:32:02 12/14/17 (4)

Good Point - Dynobot 14:39:39 12/14/17 (2)

RE: Good Point - Ivan303 16:29:45 12/14/17 (1)

HDMI - Dynobot 16:44:40 12/14/17 (0)

As you do not post your system... - Ivan303 08:47:22 12/14/17 (0)

Then... We're done. :-( - Dynobot 20:01:53 12/13/17 (2)

Pretty much done with the Pi... - Ivan303 20:48:31 12/13/17 (1)

Fun Hobby - Dynobot 20:53:02 12/13/17 (0)

Post a Message!