HTTP/1.0 200 OK Content-type: text/html
Can't connect to database, trying again....HTTP/1.0 200 OK Content-type: text/html
Can't connect to database, trying again....
In Reply to: RE: Danny does the LRS posted by emailtim on April 21, 2021 at 13:36:09:
I suspect it will be awhile.Danny's altered the network to a parallel configuration and the components are physically much larger and will require an external enclosure.
Also, his measurement technique of replacing each driver with a resistor to measure the other is flawed. In normal configuration, there's a mechanical crossover between both drivers that contributes to the final result.
In his testing case he's taking away that mechanical crossover. So, the individual plots he's showing for the stock configuration are not correct. And actually not correct for the revised the setup either.....but you just don't need a resistor to fake the other portion of the networkDave.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Danny does the LRS - Davey 04/27/2109:10:14 04/27/21 (7)
- RE: Danny does the LRS =) external enclosure - Branko 06:36:06 05/14/21 (4)
- RE: Danny does the LRS =) external enclosure - Branko 01:29:47 05/15/21 (2)
- RE: Danny does the LRS =) external enclosure - audiophiliac 14:06:57 06/17/21 (1)
- RE: Danny does the LRS =) external enclosure - Branko 02:24:04 06/18/21 (0)
- Do you have any before and after REW measurements ? - emailtim 17:54:10 05/14/21 (0)
- RE: Danny does the LRS - emailtim 12:54:04 04/27/21 (1)
- RE: Danny does the LRS - Davey 13:28:13 04/27/21 (0)