In Reply to: Thanks, guys! I'll just stick to 6.3V. nt posted by Steve Eddy on January 2, 2009 at 11:44:16:
I have limited experience with this tube, but a B+ of 14 v and a 1k cathode resistor worked quite well.
This results in a current draw of approx 0.9 mA [and a G(v) of about -0.9 v].
I also recommend that you stick with 6.3 v on the filament.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Thanks, guys! I'll just stick to 6.3V. nt - Jim Dowdy 01/4/0907:39:36 01/4/09 (1)
- now, now Jim.... - mqracing 15:00:16 01/4/09 (0)