RE: Min. current Shunt Reg. Kit and Cascode CCS

K&K Audio / Lundahl Transformers

Welcome! Need support, you got it. Or share youe ideas and experiences.

In Reply to: Min. current Shunt Reg. Kit and Cascode CCS posted by bequerel on April 5, 2016 at 00:24:37:

The current levels you quote are not too low for the Shunt Regulator Kit or the Cascode CCS Kit. The minimum for the Large Cascode CCS Kit is about 20mA, but this can be lowered by placing a resistor in place of the jumper ("J") on the board. The larger the resistor value the lower the current that can be attained, but also the smaller the range that is covered by the trimpot. Replacing the trimpot with a 500 ohm or 1Kohm pot will resolve both problems.

Kevin Carter
K&K Audio
www.kandkaudio.com

This post is made possible by the generous support of people like you and our sponsors:

Atma-Sphere Music Systems, Inc.

Follow Ups Full Thread

Topic - Min. current Shunt Reg. Kit and Cascode CCS - bequerel 00:24:37 04/5/16 (2)

RE: Min. current Shunt Reg. Kit and Cascode CCS - KevinC 04/5/1604:59:28 04/5/16 (1)

RE: Min. current Shunt Reg. Kit and Cascode CCS - bequerel 05:12:08 04/5/16 (0)

Follow Ups

RE: Min. current Shunt Reg. Kit and Cascode CCS - KevinC 04/5/1604:59:28 04/5/16 (1)

RE: Min. current Shunt Reg. Kit and Cascode CCS - bequerel 05:12:08 04/5/16 (0)

FAQ

Post a Message!

Forgot Password?

Moniker (Username):
Password (Optional):
	Remember my Moniker & Password (What's this?) Eat Me
E-Mail (Optional):
Subject:

Message:	(Posts are subject to Content Rules)

Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:	Automagically notify you when someone responds.

To view your new posting or follow-up, click on the RELOAD or REFRESH button on your browser.