In Reply to: Multicell horns posted by Iain42 on September 30, 2009 at 14:42:00:
Multicell horns are overlooked in my opinion.
They have a few advantages.
1: they have a very large source size verses frequency.
Each cell will have a specific cutoff for it's length and mouth area.
But you can make 9 cells or one cell-- all with the same cut-off frequency. You get a very large sound source. The large source is part of sound realism ( see Olson's book (--page 602-- "Acoustical Engineering" from Old Colony)
2: The throat geometry is quite good due to all those cells culminating in one place. ( no pinching)
3: The directivity is the same anywhere in the coverage angle of the horn sidewalls.
4: The much touted beaming of each cell is not that noticeable if you move your head just a few inches.
The negatives are they are very expensive to build, and they have an exponential flare. Having said this, I think most people would find a properly set up multicell to be very rewarding.
If you would like to see a curve of a 300Hz multicell, I will post one on my website.
You can also look for curves in ....
"Loudspeaker Handbook" By John Eargle
Best, Bill
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- -----------Multicell horns - RCA-fan 10/3/0907:51:39 10/3/09 (3)
- They sound great to me......................... - Cut-Throat 17:22:37 10/3/09 (0)
- RE: -----------Multicell horns - Iain42 10:33:15 10/3/09 (1)
- interested in the curve of the 300hz multicell. - RCA-fan 10:03:05 10/4/09 (0)