|
High Efficiency Speaker Asylum Need speakers that can rock with just one watt? You found da place. |
|
|
|
High Efficiency Speaker Asylum Need speakers that can rock with just one watt? You found da place. |
|
In Reply to: Re: Pouring a Tractrix Horn posted by John Sheerin on April 17, 2006 at 17:42:31:
I have a male mould and a female mould and have experimented with the full process of both....The use of the male mould yields a smoother finish but the resin shrinks onto the mould and is difficult to remove even with good mould release agents...It would damage the mould with each removal...
I had much better luck with the female mould , it yields a rougher surface but is easily removable and does no damage to the mould...No matter what you still have to bondo / primer/ and paint , so the rough surface is easily delt with..An easy job for any paint and body man....
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Pouring a Tractrix Horn - waveboxes@yahoo.com 04/17/0618:24:42 04/17/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
