|
High Efficiency Speaker Asylum Need speakers that can rock with just one watt? You found da place. |
|
|
|
High Efficiency Speaker Asylum Need speakers that can rock with just one watt? You found da place. |
|
In Reply to: Re: I'll bring the JBL CS3115's. (NT) posted by mikebake on April 9, 2002 at 17:38:43:
Hi Mike,I am using a line-level passive crossover, basically simple 1st-order RC high-pass and low-pass filters built right into the RCA connectors of the cable connecting a "buffered passive preamp" to the amps. The "buffered passive preamp" has a 12-step attenuator for volume control and an output buffer for each channel. I had to include the buffer to isolate the attenuator from the simple RC filters in the line-level crossover.
As you know, I also have a Behringer 3400 crossover. I tried it very briefly (like for 5 minutes right after I took it out of the box) on the CS3115's and decided that I liked the line-level crossover better. After hearing how good your CS3115's sounded with the Behringer, however, I think I need to try the Behringer again. Maybe I just did not get the crossover dialed in right the first time.
Kurt
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Line-level passive crossover - KCHANG 04/10/0207:56:57 04/10/02 (2)
- Re: Line-level passive crossover - mikebake 11:37:41 04/10/02 (1)
- Re: Line-level passive crossover - KCHANG 13:05:31 04/10/02 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
