Home High Efficiency Speaker Asylum

Need speakers that can rock with just one watt? You found da place.

[ Follow Ups ] Thread: [ Display  All  Email ] [ High Efficiency Speaker Asylum ]
[ Alert Moderator ]

Re: How do I model 4 midrange drivers as 1 at the point where they enter the horn?

Horn Response does not correctly model what I achieve with two midrange drivers on my unity horn (sensitivity low, low frequency very optimistic) so this may not be worthwhile, but... Since my two drivers are in parallel, I use Re/2, 2*Sd, 2*Vas, Le/2, everything else the same as a single driver. For four drivers in series-parallel, you would use 4*Sd, 4*Vas, and everything else as for a single driver. Just as a note, horn response does seem to jive with some other horns I've built. I don't know why it doesn't fit with this one.

John

This post is made possible by the generous support of people like you and our sponsors:
  Kimber Kable  

Follow Ups Full Thread
Follow Ups
  • Re: How do I model 4 midrange drivers as 1 at the point where they enter the horn? - str8aro 06/28/0217:42:35 06/28/02 (0)
You can not post to an archived thread.

[ Top Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2025, Audio Asylum, all rights reserved ]
[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]