In Reply to: If you can solder... posted by Charles Hansen on August 15, 2017 at 16:47:05:
Would only add that inspection of the solder connections where power from batteries connects to the board or at the battery compartment should be made. My RF remote for U-verse had a broken connect at the battery box. The +/- terminals in the battery box have wires soldered to them and then to the board. Took more time to set up my solder station and warm up the iron than it did to do the actual repair. Although the broken connection was only evident after I got the whole remote apart.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: If you can solder... - Sondek 08/16/1714:26:05 08/16/17 (0)