In Reply to: Cleaning Interconnect sockets ????? posted by Vinylly on December 4, 2003 at 09:24:12:
Before using anything on tube sockets and tube pins, check whether the product is designed to withstand higher temperatures. A while ago I learned one should NOT use Caig ProGold for this application since it forms (sic) a varnish which actually gets in the way. If Caig has changed the formula in recent years, which I think they may have, then it may be OK to use. But check first - you'll have a tough time removing it!
-------------------------
There is a high temp formula of ProGold. I think it is called GXL. The current specs for ProGold rate it for a high temerature of 392 deg (F) 200 (C)
http://shopping.netledger.com/s.nl/c.ACCT113328/sc.2/category.178/.f++++++++++++++++++++
My favorite way to clean input jacks that are really cruddy and oxidized is to use super fine steel wool. Think of buffing a shoe. Get a piece of steel wool and roll it in your hands until its about 4" long. This make it easy to buff the jack all the way around. Makes the jack shine like a mirror. Don't forget to vacumm the wool dust then treat with Deoxit for protection. I've made many a dull finished look like new.
---------------------------
YIKES!
I hope you didn't want any plating left on your jacks after a couple cleanings.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Cleaning Interconnect sockets ????? - Todd R 12/4/0319:16:35 12/4/03 (0)