|
Digital Drive Upsamplers, DACs, jitter, shakes and analogue withdrawals, this is it. |
|
|
|
Digital Drive Upsamplers, DACs, jitter, shakes and analogue withdrawals, this is it. |
|
In Reply to: ...some notes on dBu and maximum preamp input levels posted by PeAK on March 5, 2005 at 08:16:56:
Hi PeAK,
I'm going to be using a Tact room correction/ digital preamp into the dac1. I will them go direct into bryston 4bsst power amp. The amp is rated for 23db of gain at 3.6 volts input (balanced). I would assume that the way to go would be to setup the dac1 to output 3.6 volts at 0db input (on a fully modulated source).
Does that seem right?
Gerry
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: ...some notes on dBu and maximum preamp input levels - gdg 03/5/0515:32:17 03/5/05 (2)
- Re: ...where to set the digital gain - PeAK 18:11:48 03/5/05 (1)
- Re: ...where to set the digital gain - gdg 19:28:16 03/5/05 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
