|
Digital Drive Upsamplers, DACs, jitter, shakes and analogue withdrawals, this is it. |
|
|
|
Digital Drive Upsamplers, DACs, jitter, shakes and analogue withdrawals, this is it. |
|
In Reply to: Noise problem with DCS DElius posted by Fdastoor on August 21, 2000 at 03:18:28:
You may have tried this as well, but there is a "wide" versus "narrow" (I think this is what they call it) setting that you might try changing to the wide if you aren't already using it. The delius and purcell both want a very exact signal of consistent strength. I ran into a problem of the purcell not locking onto a 96khz output from a denon 5000 modified by MSB. I was using a good digital cable, and it wouldn't lock on. I switched to a cheap digital cable (xlo er2) and it worked fine! So, you might want to think about various cables but it may be the incompatibility with your transport signal.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Noise problem with DCS DElius - chris e. 08/21/0009:13:33 08/21/00 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
