Re: You may want to try this.... - SteveLim

Cable Asylum

Interconnects, speaker wire, power cords. Ask the Cable Guys.

Re: You may want to try this....

Posted by SteveLim on March 6, 2002 at 04:01:04

In Reply to: You may want to try this.... posted by Penguin on March 5, 2002 at 20:40:27:

Thanks for the inputs. For now, I'll stay with the present straightforward Belden89259 interconnect.
My pressing desire now is to address the brightness in my system. And my suspect is either the CD63SE or the Nordost. (Anyone reading this, feel free to point out if i'm wrong).
I suspect the Nordost is forward sounding, and lacking in gauge thickness so that i'm not getting the optimal sound (better Bass and fuller sound) that the Aragon Amp is capable of.

So have been reading and researching around the audio web about DIY cables by ChrisVenHaus, JonRisch, TNT. I must say a big "Thank You" to them and all you DIY folks sharing and offering advice to us novices. But I admit that my mind is exploding trying to digest so much info out there, and confused by so many designs and variations being discussed about in the forums.

The key question in my mind is which would be the appropriate DIY cable to meet my above needs ? Hope that those who have DIYed can advice/share their perceived characteristics of their cables, or better still provide comparisons between them.

Thanks & Cheers,
Steve

This post is made possible by the generous support of people like you and our sponsors:

Follow Ups Full Thread

Topic - DIY Cables vs. Commercial Cable - SteveLim 16:42:04 03/5/02 (13)

Re: DIY Cables vs. Commercial Cable - dlarkin_dc 06:28:38 03/6/02 (0)

Re: DIY Cables vs. Commercial Cable - Thorsten 04:21:38 03/6/02 (7)

Re: CC89259 and 89259 in general - Jon Risch 19:08:01 03/7/02 (1)

Re: CC89259 and 89259 in general - Thorsten 03:41:57 03/8/02 (0)

Thanks Thorsten. Some clarifications on Belden89259 vs 89292 - SteveLim 20:26:47 03/6/02 (4)

Re: Thanks Thorsten. Some clarifications on Belden89259 vs 89292 - Thorsten 02:57:22 03/7/02 (3)

Will removal of the "phase-shield" affect the timing of the sound ? - SteveLim 16:43:15 03/7/02 (2)

Re: Will removal of the "phase-shield" affect the timing of the sound ? - Thorsten 17:37:03 03/7/02 (1)

Thanks. - SteveLim 04:27:07 03/8/02 (0)

You may want to try this.... - Penguin 20:40:27 03/5/02 (1)

Re: You may want to try this.... - SteveLim 03/6/0204:01:04 03/6/02 (0)

Re: DIY Cables vs. Commercial Cable - agram 18:13:50 03/5/02 (1)

Taddeo Digital Antitdote - SteveLim 20:35:35 03/5/02 (0)

Follow Ups

Re: You may want to try this.... - SteveLim 03/6/0204:01:04 03/6/02 (0)

You can not post to an archived thread.