Home ANK AudioKits Forum

ANK AudioKits support forum

RE: Very nice

Thank you for your patience in waiting for a reply.

At present it is an L2 line and phono, so no output xformers. Perhaps you're right that one M2 PS can't run both L3 line and phono, I don't know. Once the output xformers are installed it should be better to run off separate PS as you have done, and as done in the M3.

To clarify, I've used the Audio Consult wire for the line level inputs only, not the outputs, nor the phono input which uses the cinemag pigtails directly between the RCA's and the phono board as you have done. I also will be adding a ELMA rotary switch on the rear for selecting betweeen MC/MM and different cinemag gain choices.

I'd also like to design a tone control stage (heresy, I know) ahead of the output stage, so the 2 power supplies will likely be necessary, and it will take some innovation to get it all in the box. Oh, did I mention stepped attenuators for volume, bass and treble?

It might be my imagination, but the cinemags sound more lively (less dull) when completely inside the aluminum box.


This post is made possible by the generous support of people like you and our sponsors:
  Parts Connexion  


Follow Ups Full Thread
Follow Ups
  • RE: Very nice - Frank E 10/15/0817:35:02 10/15/08 (1)

FAQ

Post a Message!

Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.