Amp/Preamp Asylum Looking for a new Amp or Preamp? If you're after tubes, post over here. |
|
In Reply to: RE: I've found the best way to eliminate too much gain posted by AbeCollins on March 3, 2021 at 08:24:38:
It IS possible in some cases, especially when the preamp is using some IC volume control chips. Some of them have very low overload margin.
However, a properly designed preamp should be able to take 10, or 20, or even 100V in and not choke on it.
Remember - there are sources out there with 10V outputs.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Overdriving the preamp - Victor Khomenko 03/3/2111:28:29 03/3/21 (1)
- RE: Overdriving the preamp - AbeCollins 16:14:32 03/3/21 (0)