Amp/Preamp Asylum Looking for a new Amp or Preamp? If you're after tubes, post over here. |
|
In Reply to: By bridging the amp, you cut the damping factor in half posted by Dave_K on July 22, 2020 at 10:52:50:
The A23 damping factor at 20 Hz(where it matters most not at 1 kHz like some specs use but don't tell you) is specified at over 800 probably into 8 ohms. Bridging will reduce it to over 400 which is so high the reduction is irrelevant.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: By bridging the amp, you cut the damping factor in half - hahax@verizon.net 07/22/2020:44:34 07/22/20 (8)
- RE: By bridging the amp, you cut the damping factor in half - pictureguy 15:03:26 07/23/20 (7)
- Unlikely - Dave_K 06:39:24 07/24/20 (6)
- RE: Unlikely - pictureguy 09:30:16 07/24/20 (5)
- To clarify - Dave_K 09:04:38 07/29/20 (4)
- RE: To clarify - Kal Rubinson 15:35:11 07/29/20 (3)
- RE: To clarify - pictureguy 00:06:05 08/6/20 (2)
- Yes: To clarify - Kal Rubinson 10:21:21 08/6/20 (1)
- RE: Yes: To clarify - pictureguy 12:13:55 08/6/20 (0)