Home Amp/Preamp Asylum

Looking for a new Amp or Preamp? If you're after tubes, post over here.

Voltages for connecting ds18b20 to Edison breakout board



It appears that the upm library provides support for reading temperatures from a ds18b20 on an Edison via uart. They also provide this hookup diagram. However, it looks like the ds18b20 can only operate at 5V while the UART TX and RX on the breakout board are at 1.8V (table 28). This upm diagram seems to suggest they should be directly connected though. I am hesitant to try it for fear of damaging the board or module.

this is the date sheet: http://www.componentschip.com/details/Maxim-Integrated/DS18B20.html

Do I need to step the voltage up and down between the Edison uart and a 1-Wire bus?

If so, what would be the appropriate way to do that?




This post is made possible by the generous support of people like you and our sponsors:
  Signature Sound   [ Signature Sound Lounge ]


Topic - Voltages for connecting ds18b20 to Edison breakout board - yang1988 01:46:48 06/20/17 (0)

FAQ

Post a Message!

Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.