Amp/Preamp Asylum Looking for a new Amp or Preamp? If you're after tubes, post over here. |
|
In Reply to: Capacitor value question posted by rockpassion on February 22, 2014 at 22:46:47:
...such as an RIAA-equalization network, one can change the value somewhat with no audible result. And caps have value-specification ranges, such as + or - 20%, so the 0.18uF cap and the 0.22uF cap could be the SAME value and both be within tolerance.
Generally, one can always use higher-Voltage-rated caps, but one usually should not use LOWER-Voltage caps...
...so yes to both of your examples.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Unless a cap is in a circuit where the value is critical... - jeffreybehr 02/23/1410:21:31 02/23/14 (0)