|
Amp/Preamp Asylum Looking for a new Amp or Preamp? If you're after tubes, post over here. |
|
|
|
Amp/Preamp Asylum Looking for a new Amp or Preamp? If you're after tubes, post over here. |
|
In Reply to: Replacing factory tubes with NOS tubes posted by GOS on August 13, 2010 at 04:15:35:
AI designed the drive voltage around the Rooskie tubes and is stated in the manual. Both the linestage and phono run the Vp at 120V. The Ip is very low as well - too low for proper tone.
That high Vp issue which causes NOS tubes to cook and fry, can be easily modified via a few resistors from Rat Shack. If your can DIY or want more direction, email me offline.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- It's not just the M3 it's the M2x all the way through.. - wheezer 08/14/1014:09:53 08/14/10 (1)
- RE: It's not just the M3 it's the M2x all the way through.. - freetowor@yahoo.com 19:08:54 08/14/10 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]