1: Vinyl Asylum, RE: Help with SUT! (0.00)
Posted by jphii on 2012-03-15, 07:29:54 (67.238.203.194)
Did you decide on a step up yet? I have a K&K I built for a 103r. .......

2: Vinyl Asylum, RE: Dry brushes (0.00)
Posted by jphii on 2009-10-07, 11:04:29 (71.48.8.206)
Thanks for reminding me I need a new one. .......

3: Vinyl Asylum, RE: OK Gang . here is my Magnetics suspension for garrard 401 discussion welcome (0.00)
Posted by jphii on 2007-11-18, 15:42:24 (75.110.3.182)
I was gonna try this but my Teres weighs about 90# and they would have to be some powerful magnets. .......

4: ANK AudioKits Forum, RE: AZ Three speaker drivers (0.00)
Posted by jphii on 2007-08-21, 17:55:55 (75.110.58.7)
Thanks David. .......

5: ANK AudioKits Forum, RE: AZ Three speaker drivers (0.00)
Posted by jphii on 2007-08-14, 13:30:05 (75.110.58.7)
Somebody help me out. .......

6: ANK AudioKits Forum, AZ Three speaker drivers (0.00)
Posted by jphii on 2007-08-13, 18:45:55 (75.110.58.7)
I need to get a new set of woofers for my AZ Threes. Do any of the kit speakers work/fit in the Three cabinets? .......

7: ANK AudioKits Forum, Re: Have anyone compared a M3 to a Supratek ? (0.00)
Posted by jphii on 2007-01-21, 10:57:36 (75.110.78.115)
It wasn't that hard to let it go, I really prefer AN!! .......

8: ANK AudioKits Forum, Re: Have anyone compared a M3 to a Supratek ? (0.00)
Posted by jphii on 2007-01-20, 11:55:28 (75.110.78.115)
I had a very unique Syrah, with a Cortesse power supply. One of a kind according to Mick. I did a direct comparison against an M3 Phono (non-kit) and my Soro SE Phono. The M3 won hands down, with stoc .......

9: ANK AudioKits Forum, M3 Line Pre-Amplifier Kit question (0.00)
Posted by jphii on 2006-08-16, 15:05:57 (68.230.168.186)
In the pic on the kits site it shows phono inputs. Does that mean a phono version is available? .......

10: Vinyl Asylum, Re: VA obcessive compulsive cartrdige list (0.00)
Posted by jphii on 2006-05-29, 12:48:11 (68.230.168.186)
I'm not in either. Denon 103r, and a ZYX rs20. More time on the ZYX. .......

11: ANK AudioKits Forum, Re: Brian - New Product Inquiry... (0.00)
Posted by jphii on 2006-05-14, 06:39:59 (68.230.168.186)
Freewespace kinda suckks. You can see it here @ jphii.com .......

12: ANK AudioKits Forum, Re: Brian - New Product Inquiry... (0.00)
Posted by jphii on 2006-05-12, 18:05:54 (68.230.168.186)
They really aren't that hard to build! .......

13: Vinyl Asylum, Re: Hi Slate (0.00)
Posted by jphii on 2005-07-22, 12:37:11 (68.226.8.60)
But it's not a $750 cartridge. Check with Mehran at Sosasound. He gives a MUCH better dael than that. MUCH BETTER! .......

14: Vinyl Asylum, Hi Slate (0.00)
Posted by jphii on 2005-07-21, 19:19:46 (68.226.8.60)
Shit can the OC9. The 103r is much better. The only catridge I've found in that price range that is MUCH better is the ZYX RS20. I tossed the OC9 a year ago, and have kept the 103r over many other car .......

15: Vinyl Asylum, Shit can tha OC9! (0.00)
Posted by jphii on 2005-07-21, 19:07:54 (68.226.8.60)
Real simple: The OC9 is a piece of shit. Hides all kind of stuff. Stick with the Denon, and upgrade elsewhere. .......

16: ANK AudioKits Forum, What tubes? (0.00)
Posted by jphii on 2005-07-17, 17:27:33 (68.226.8.60)
Does it use on the phono board? It doesn't say on the website. .......

17: Vinyl Asylum, Re: Remove Arm Before Installing Cartridge? (0.00)
Posted by jphii on 2005-07-17, 17:24:18 (68.226.8.60)
Take it off. That way when you have a broken cartridge clip (like I did this weekend), it is much easier to throw the tonearm across the room. .......

18: Vinyl Asylum, Check mine out (0.00)
Posted by jphii on 2005-07-15, 08:28:40 (67.76.111.173)
I have a cheezy website that shows a lot of how I built mine. .......

19: Vinyl Asylum, Don't forget CTC (0.00)
Posted by jphii on 2005-07-10, 07:05:03 (68.226.8.60)
Remember, these are 3 guys (one of whom has been mentioned here) that have like 600 years combined dessign experience! The current Blowtorch goes for 15 large. OUCH! .......

20: Vinyl Asylum, I bought all of them at once... (0.00)
Posted by jphii on 2005-07-06, 14:26:42 (68.226.8.60)
And it is still the most money I have shelled out at one time for LPs. And I gotta tell ya, it was worth every penny. I have I-IV that I bought when they came out (original pressings), and I like the .......

21: Vinyl Asylum, Take a look at mine (0.00)
Posted by jphii on 2005-06-05, 20:25:50 (68.226.8.60)
It may offer some help, may not. But it does show a lot of what I did to build my Teres. Hope it helps! Joe .......

22: Vinyl Asylum, Thanks! (0.00)
Posted by jphii on 2005-05-30, 08:56:39 (68.226.8.60)
Thanks! .......

23: Vinyl Asylum, How do you contact him? (0.00)
Posted by jphii on 2005-05-30, 06:21:09 (68.226.8.60)
Tried a couple of different Google searches, no joy. .......

24: Vinyl Asylum, Re: Any record stores in Akron, OH? (0.00)
Posted by jphii on 2005-05-29, 06:40:21 (68.226.8.60)
The is one in Highland Square. I can't remember the name, (I think it is Square Records) but I went there last time I was home to see the family in Akron. It's little, but I found a ton of stuff I lik .......

25: Vinyl Asylum, Here is where you get the Mylar tape (0.00)
Posted by jphii on 2005-05-29, 06:29:12 (68.226.8.60)
It is all the way down the page. They call them Mylar streamers, and a 100' x 1/2" roll is about $4. I've tried both, and I like the mylar better. I got my nifty little Markertek splicing machine this .......

26: Vinyl Asylum, Here's what I would do (0.00)
Posted by jphii on 2005-05-27, 08:24:33 (69.69.221.124)
Being a smoker, but one who never smokes in the music room, I always disclose that fact when I sell something. Per Agon grading system he screwed you. If he is the second owner, it cannot be a 10/10. .......

27: Vinyl Asylum, Go with the Denon (0.00)
Posted by jphii on 2005-05-21, 05:41:58 (68.226.8.60)
For the $500 difference I like it better. And, despite what some might say, for MY TASTES, it is a better cartridge period. You also might want to go to the K&K forum and look at the K&K step up based .......

28: ANK AudioKits Forum, Is there ever going to be a Step-up kit? (0.00)
Posted by jphii on 2005-05-18, 08:28:02 (69.69.221.124)
Just wondering what the possibilities of it happening are. .......

29: ANK AudioKits Forum, Let's get this straight.... (0.00)
Posted by jphii on 2005-05-18, 07:53:45 (69.69.221.124)
What are the corresponding CURRENT model to the Kit 02 and the Kit 03? .......

30: Vinyl Asylum, Should have said BIG order!! NT (0.00)
Posted by jphii on 2005-05-06, 08:50:02 (67.76.141.27)
z .......

31: Vinyl Asylum, Just made a bi order two days ago (0.00)
Posted by jphii on 2005-05-06, 08:49:08 (67.76.141.27)
for some Led Zepplin: Led Zeppelin - Houses of the Holy - Classic Records Led Zeppelin - I - Classic Records Led Zeppelin - II - Classic Records Led Zeppelin - III - Classic Records Led Zeppelin - IV .......

32: Vinyl Asylum, Re: Record Show in NC (0.00)
Posted by jphii on 2005-04-02, 17:05:03 (68.226.8.60)
Thanks! I live in Greenville, NC, and I'm going to try and make it. So little good stuff here! .......

33: Vinyl Asylum, Re: Rega P2 platter wobble? (0.00)
Posted by jphii on 2005-04-01, 07:40:07 (68.226.8.60)
What a boob! Once he figures out they all wobble, hum, and just suck generally, he can go bother the people over at the digital forum. .......

34: Vinyl Asylum, Built one, have 2 more plinths, (0.00)
Posted by jphii on 2005-03-30, 08:54:40 (67.76.141.27)
and several other in the works. God knows when it will all be done! .......

35: Vinyl Asylum, Then why have you had if for sale for 4 days? (0.00)
Posted by jphii on 2005-03-29, 17:27:56 (68.226.8.60)
What happened to the Technics? Sure doesn't sound like the pro-ject has been sitting in the box. I invite all to check this out: "I bought a pro-ject turntable model 1 xpression recently to replace m .......

36: Vinyl Asylum, Re: New Teres turntable completed! (0.00)
Posted by jphii on 2005-03-22, 11:17:36 (67.76.141.27)
Nice one! Any chance your buddy will make another bearing? .......

37: Vinyl Asylum, Re: Ok, what is the deal with the regular DL103? (0.00)
Posted by jphii on 2005-03-17, 10:44:20 (67.76.141.27)
1. Sort of 2. No .......

38: Vinyl Asylum, I don't know if it is worth.... (0.00)
Posted by jphii on 2005-02-21, 11:25:43 (68.110.137.231)
a couple thousand dollars, but you can follow this one and see what it goes for. This is a very nice example. He also has a Dragon up for sale too. .......

39: Vinyl Asylum, Discovery, History or sports! (0.00)
Posted by jphii on 2005-02-19, 07:39:51 (68.110.137.231)
that's about it .......

40: Vinyl Asylum, My cat! (0.00)
Posted by jphii on 2005-02-16, 06:03:00 (67.77.226.136)
Damn thing got to close. .......

41: Tubes Asylum, Golden Dragon 350b (0.00)
Posted by jphii on 2005-02-14, 06:48:50 (67.77.226.136)
Anyone heard them? Pretty cheap at under a hundred for a quad. Just wondering how they are up against the real thing. I'm not paying over a grand for WE's. .......

42: Vinyl Asylum, Not a DAMN THING! (0.00)
Posted by jphii on 2005-02-13, 17:53:42 (68.110.137.231)
My old lady has her head so far up my ass I couldn't concentrate if there was something spinning. One of these days that bitch is out the door! .......

43: Vinyl Asylum, To answer your questions.... (0.00)
Posted by jphii on 2005-02-13, 10:41:04 (68.110.137.231)
It was built by yours truly. Basically a 245, but different. That bolt is long gone! I made a neat little ebony knob. Look at me cheezy website for more pics. I've changed so many things that most of .......

44: Vinyl Asylum, Re: Help a newbie! (0.00)
Posted by jphii on 2005-02-13, 07:12:35 (68.110.137.231)
Is that what you are looking for? .......

45: Vinyl Asylum, Re: Beating a Denon 103r (0.00)
Posted by jphii on 2005-02-10, 18:29:50 (68.110.137.231)
OC9 can't touch the Denon. I like the 103r better than the Shelter 501. For under a grand I'd say stick with the 103r. .......

46: Vinyl Asylum, I think you got screwed (0.00)
Posted by jphii on 2005-02-07, 13:56:06 (68.110.137.231)
and the dealer should be willing to work with you. That said, you should have a long talk with your son. .......

47: Vinyl Asylum, Re: Did I made a big (& "expensive") mistake? (0.00)
Posted by jphii on 2005-02-07, 10:11:07 (67.77.226.136)
Well, I routinely speak highly of the 103r, FOR THE MONEY! Shit, if you are worried about missing something, send me the Benz and I'll send you the 103r. We'll see who is happier! .......

48: ANK AudioKits Forum, Very nice work & many questions for the board... (0.00)
Posted by jphii on 2005-02-04, 09:33:27 (67.77.226.136)
Nico, congratulations! I really like the sapele. Mitch does nice stuff. I'm waiting for Brian to let me know when the shipment comes in so I can start mine. Our shops are capable of work of that quali .......

49: Vinyl Asylum, Re: Schroeder Tonearm Pricing (US) (0.00)
Posted by jphii on 2005-01-21, 09:50:35 (67.77.226.136)
Thanks Thom, most apprciated! .......

50: ANK AudioKits Forum, Re: Peter, another question (0.00)
Posted by jphii on 2005-01-20, 16:54:17 (68.110.137.231)
Thanks Peter. I'd put my woodworking skills up against any I've seen so far. I just want to make sure that the quality of the cabinets will raise the level of the kit. Until the day I can afford the " .......

51: Vinyl Asylum, Re: I asked for that one!! (Actually, it does sound quite like a f*rt) - nt (0.00)
Posted by jphii on 2005-01-18, 15:21:15 (68.110.137.231)
Sorry, couldn't help myself! .......

52: Vinyl Asylum, Re: What causes a periodic "psshzzzzt" sound through my speakers? (0.00)
Posted by jphii on 2005-01-18, 13:53:22 (68.110.137.231)
Stop eating beans & franks! .......

53: Tube DIY Asylum, What is the best... (0.00)
Posted by jphii on 2005-01-17, 13:04:03 (68.110.137.231)
book to get to really understand what I am doing when I build something. I mean building stuff is the easy part, but understanding what you guys are talking about half the time is beyond me. I'd like .......

54: ANK AudioKits Forum, Thanks Vik.... (0.00)
Posted by jphii on 2005-01-17, 13:01:01 (68.110.137.231)
I wasn't paying attention as to which pre kit you were talking about! Joe .......

55: ANK AudioKits Forum, Peter, another question (0.00)
Posted by jphii on 2005-01-17, 12:59:50 (68.110.137.231)
It says on the kits site that the best you can expect from a kit 3 is the equivilant of an ANE/L. Since I consider myself a pretty damn good woodworker, and have a little luthier experience, I plan to .......

56: ANK AudioKits Forum, What about (0.00)
Posted by jphii on 2005-01-17, 05:44:27 (67.77.226.136)
The Signature kit? Where does it fall? Joe .......

57: Vinyl Asylum, Re: Which one of these carts would be best (0.00)
Posted by jphii on 2005-01-16, 17:23:43 (68.110.137.231)
The Denon spanks them all. .......

58: ANK AudioKits Forum, Re: new 300B parallel kit (0.00)
Posted by jphii on 2005-01-14, 06:47:06 (67.77.226.136)
Sound good Brian. This gives me one more option as I convert to an all AN kits system this year. The Supratek is going on Audiogon next week, so let me know when the Kit 3 speakers get there. Joe ::: .......

59: ANK AudioKits Forum, Re: armboard (0.00)
Posted by jphii on 2005-01-09, 16:13:35 (68.110.137.231)
I made a few different ones. I found the one with the cones sounds the worst. The solid, lead-loaded macassar ebony one sound the best. It's been back on for a while. .......

60: ANK AudioKits Forum, Re: Audio Note Speaker kit 03 project!! (0.00)
Posted by jphii on 2005-01-08, 07:47:51 (68.110.137.231)
First off, Nico, those cabs are gorgeous! I just exchanged emails with Brian about getting my Kit 3's. He is going to have some in stock the first week of Feb. So, I told him to let me know when they .......

61: Vinyl Asylum, Re: Hmmm. (0.00)
Posted by jphii on 2005-01-05, 17:40:22 (68.110.137.231)
Gotta be a troll. The idiot hasn't been born who would try that! .......

62: SET Asylum, My 2c (0.00)
Posted by jphii on 2005-01-04, 07:51:50 (67.77.226.136)
I have emailed Peter on many an occassion and he has always taken the time to respond to my (sometimes stupid) questions. David Cope has been just as helpful. Matter of fact Peter has sent me parts I .......

63: Vinyl Asylum, Re: Wooden tonearm that hangs from a string (0.00)
Posted by jphii on 2004-12-27, 19:11:02 (68.110.137.231)
Challenge/counter, could be interesting. Damn Frank, I may take you up on that one! Hope you can make it to Miami. Joe .......

64: Tubes Asylum, Steve, send me your email please... (0.00)
Posted by jphii on 2004-12-13, 11:29:53 (68.110.137.231)
if your offer is open to all. You can email me through the board. I have but a few tubes I'm looking for. Joe .......

65: Vinyl Asylum, Re: Thorens pic of the day..... (0.00)
Posted by jphii on 2004-12-06, 10:09:18 (68.110.137.231)
Nice one! .......

66: Vinyl Asylum, Re: FWIW, I don't think so (0.00)
Posted by jphii on 2004-11-19, 11:24:15 (67.76.136.167)
Doug, Sounds like you are getting a little nuts here!!!! So, what are you going to do with all the excess cartridges? Joe .......

67: Tube DIY Asylum, Where did you get the 6c45p's? (0.00)
Posted by jphii on 2004-11-09, 09:31:38 (67.76.136.167)
I have them in the phono stage of my Supratek and would like to pick up a spare quad. TIA .......

68: Vinyl Asylum, Give it up (0.00)
Posted by jphii on 2004-11-07, 16:29:12 (68.110.137.231)
This thing belongs with the 5 million dollar Who collection. .......

69: Water Cooler, IRREGARDLESS is not... (0.00)
Posted by jphii on 2004-11-02, 06:24:06 (67.76.136.167)
a word period. Many make this mistake. .......

70: ANK AudioKits Forum, Re: Congrats David!! (0.00)
Posted by jphii on 2004-11-02, 06:16:38 (67.76.136.167)
I know! One of these days.... The fun part would be building the cabinets. One of the great advatages to having 2 fully equpped woodshops. .......

71: ANK AudioKits Forum, Congrats David!! (0.00)
Posted by jphii on 2004-11-01, 09:16:54 (68.110.137.231)
Just saw this today & thought I'd send best wishes. Still liking my AZ3's, but one of these days, the Kit 2 may happen. .......

72: OTL Asylum, Re: Thanks Rod! I reupped my membership for this forum! (0.00)
Posted by jphii on 2004-10-25, 09:04:02 (67.76.136.167)
I finally got my membership too, thanks for the yo-yo Rod, signed & all!! .......

73: Vinyl Asylum, Re: Rega RB300 + Denon 103R (0.00)
Posted by jphii on 2004-10-22, 06:06:42 (67.76.136.167)
I've used the 103 with both the 250 & 300. No problems, I like it. .......

74: Outside Asylum, NYT endorsed Kerry - the Kiss of Death! (0.00)
Posted by jphii on 2004-10-18, 07:09:35 (65.164.196.193)
Kerry, the paper said, “has always understood that America's appropriate role in world affairs is as leader of a willing community of nations, not in my-way-or-the-highway domination," it said. Speaki .......

75: Outside Asylum, So true [nt] (0.00)
Posted by jphii on 2004-10-18, 07:00:35 (65.164.196.193)
[nt] .......

76: Outside Asylum, Yes [nt] (0.00)
Posted by jphii on 2004-10-18, 06:59:25 (65.164.196.193)
[nt] .......

77: Outside Asylum, Damn straight, Kerry's an idiot! (0.00)
Posted by jphii on 2004-10-18, 06:49:25 (65.164.196.193)
So is that pinhead Edwards. .......

78: High Efficiency Speaker Asylum, No, absolutely not (0.00)
Posted by jphii on 2004-10-16, 18:32:03 (68.110.137.231)
Veneer can be very nice, but baltic birch, in cabinet grade, will look as good as any veneer out there (save exotics), and save you: 1. time 2. money 3. aggravation Also, I've never seen 3/4" 13 ply, .......

79: ANK AudioKits Forum, Potentiometer question (0.00)
Posted by jphii on 2004-10-12, 09:05:02 (69.69.212.226)
Can the amp kits be ordered without the volume control & the hole for it? Joe .......

80: Tubes Asylum, Re: audionote made in Canada. any body heard of ? (0.00)
Posted by jphii on 2004-10-08, 10:07:30 (69.69.212.226)
I saw that too, as Audio Note is a saved search I check regularly. I almost emailed Peter Q. to see what the deal is. Very strange. .......

81: Tubes Asylum, 6c45pi v. 5842 (0.00)
Posted by jphii on 2004-10-08, 10:06:03 (69.69.212.226)
I need a little help here. I have a Supratek Syrah that uses 6c45pi (4) in the phono stage. I was told that I could substitute the 5842 for them. But, when I put in the 5842, no joy. I get nothing. An .......

82: Vinyl Asylum, Re: RRL - it works! But... (0.00)
Posted by jphii on 2004-10-07, 06:26:08 (69.69.212.226)
I have been a believer in RRL fluid for some time now. But recently, the opportunity came to be a beta tester for a new product called Audio Intelligent Vinyl Solutions. It will be all I use from now .......

83: Vinyl Asylum, Re: champion level 2 bang for the buck? (0.00)
Posted by jphii on 2004-09-19, 08:34:14 (68.110.137.231)
I wouldn't put it on my short list. For $3500, you can get a Teres 255 and have money left over for a good arm & cartridge. The Clearaudio can not compete. .......

84: Vinyl Asylum, Re: Probably the only deal (0.00)
Posted by jphii on 2004-09-19, 05:30:26 (68.110.137.231)
Yes, it is. .......

85: Vinyl Asylum, 10? (0.00)
Posted by jphii on 2004-09-15, 10:07:18 (69.68.69.99)
nt .......

86: Vinyl Asylum, Re: Art Audio Vinyl One and K and K Audio phono stage (0.00)
Posted by jphii on 2004-09-14, 16:30:24 (68.110.137.231)
Bout half the Vinyl Reference. .......

87: ANK AudioKits Forum, Re: Does AN make a PC? Just IC, right? (0.00)
Posted by jphii on 2004-09-10, 08:12:48 (69.68.69.99)
I think you are right. I'd go AN ic's, but I left the stock cord on my SoroSE Phono & CD2. .......

88: Inmate Systems, jphii's Jphii's Analog rig (0.00)
Posted by jphii on 2004-09-07, 08:19:07 (69.68.69.99)
To add your system, you must register ."> Audio Asylum Inmate jphii's Jphii's Analog rig System Home / FAQ / News Classifieds / Ev .......

89: DIY HiFi Forum, TT bearing question (0.00)
Posted by jphii on 2004-09-07, 07:44:16 (69.68.69.99)
Does anyone know where I can get a custom made TT bearing? I need one that will support a 100# platter. TIA Joe .......

90: Vinyl Asylum, Re: stupid " Maybe I Need Something Different" (0.00)
Posted by jphii on 2004-09-06, 07:27:14 (68.110.137.231)
Buy the Teres, use your arm and cartridge. You'll be surprised. .......

91: ANK AudioKits Forum, Re: Kit 1 i/c & powercord recommendations (0.00)
Posted by jphii on 2004-09-06, 06:53:16 (68.110.137.231)
I'll go out on a limb here, and say: AUDIO NOTE .......

92: Vinyl Asylum, Re: Shelter 501 Classic vs. Shelter 501 MKII? (0.00)
Posted by jphii on 2004-08-27, 10:19:29 (69.34.146.188)
I was wondering the same thing. I saw it too and can't figure it out. .......

93: Vinyl Asylum, Try this (0.00)
Posted by jphii on 2004-08-24, 06:45:43 (69.34.146.188)
Use a blue led light. It will light the whole plinth. .......

94: Vinyl Asylum, ZYX (0.00)
Posted by jphii on 2004-08-23, 17:43:50 (68.110.137.231)
You can get the Fuji on Agon for $1500. I've dealt with the Mehran (Sorasound), and he is very easy to deal with. Great guy. Give it a shot and let us know how it works. Enquiring Teres minds want to .......

95: Vinyl Asylum, Me likes too! (0.00)
Posted by jphii on 2004-08-23, 17:41:08 (68.110.137.231)
It looks like a great effort. I hope you keep us updated on how it sounds. Just remember, don't let the wife touch it! .......

96: Vinyl Asylum, Divorce! (0.00)
Posted by jphii on 2004-08-23, 17:37:27 (68.110.137.231)
My wife knows the rules. She's lucky I showed her how to use the Supratek so she can play them little silver things. No touchy turntable! Tell her to get with the program or throw her out! You can tea .......

97: Vinyl Asylum, Re: Decisions decisions decisions... which 'table? Amazon or Teres? (0.00)
Posted by jphii on 2004-08-08, 10:11:20 (68.110.136.242)
Well, I can't say anything about the Amazon, 'cause I've never heard it, even though I've seen one. But, I can comment on the Teres. About the best thing I can say about it is that I built mine withou .......

98: Vinyl Asylum, Re: Ok, I'm finally gonna do this, but I need your help please... (0.00)
Posted by jphii on 2004-08-04, 15:18:06 (68.225.138.21)
Jesus, all these posts and not one recommendation for a Teres? Can you do ANY DIY? Teres 150: $1890 RB250: $250 Denon 103: $200 K&K Tranny: $250 So, there is about $2600. VPI 16.5 & RRL fluids .......

99: Vinyl Asylum, Re: shelter 501 Mk II (0.00)
Posted by jphii on 2004-08-03, 10:36:52 (68.225.138.21)
yes. how much, how old, etc.... .......

100: Vinyl Asylum, Re: Price of a Linn Basik (0.00)
Posted by jphii on 2004-07-30, 20:11:44 (68.225.138.21)
I'd give him 10 bucks, listen to it for about a week, and then go buy a Teres! Just kidding! Ask him how much he paid, then offer him half that. That gives you a starting pint for negotiations. ::: TO .......

101: Vinyl Asylum, Re: Need tube preamp recomendation (0.00)
Posted by jphii on 2004-07-26, 19:16:31 (68.225.138.21)
Ever think about a Supratek? You obviously like tubes, and it is so much better than all you have listed it's not even funny. The phono stage is excellent, and you'll have about a grand left over for .......

102: Vinyl Asylum, NO! (0.00)
Posted by jphii on 2004-07-26, 14:27:33 (68.225.138.21)
Don't even try it. .......

103: Vinyl Asylum, RRL (0.00)
Posted by jphii on 2004-07-15, 07:32:24 (67.76.32.124)
I agree.- .......

104: Vinyl Asylum, 2 things to try (0.00)
Posted by jphii on 2004-07-13, 18:44:41 (68.226.15.237)
First, check the cartridge connections. If you moved them, one may be loose. Also, make sure they don't hang below the body of the cartridge. Second, if it only happens on one channel, I'd check all w .......

105: Vinyl Asylum, Vinyl Engine NT (0.00)
Posted by jphii on 2004-07-13, 18:36:45 (68.226.15.237)
z .......

106: Vinyl Asylum, Re: Recommendations wanted: What IC for Dual CS7000 to Audio Research PH-1? $200 used tops? (0.00)
Posted by jphii on 2004-07-13, 18:35:20 (68.226.15.237)
I'd try Zu Cables Xaus. You can get it on epay for about 100-150. I've had great luck with their speaker, power, digital & video cables in the past. I was going to buy the Xaus, but I got a Supratek a .......

107: Vinyl Asylum, Re: Upgrade advice sought (0.00)
Posted by jphii on 2004-07-13, 18:28:20 (68.226.15.237)
I'd go with the 16.5. You can get the best deal on a new one (IMHO) from Galen Carol Audio. I say this becuase after I bought mine, along with the RRL fluids, I was amazed at the difference in sound. .......

108: Tweakers' Asylum, Try not to be an AS#$%&LE & help the brother out! (0.00)
Posted by jphii on 2004-07-13, 11:14:23 (67.76.32.124)
z .......

109: ANK AudioKits Forum, Re: Speaker kit 02 finally built! (0.00)
Posted by jphii on 2004-07-13, 10:08:44 (67.76.32.124)
Looks good Brian! .......

110: Vinyl Asylum, Mexican food! NT (0.00)
Posted by jphii on 2004-07-04, 10:07:42 (68.226.15.237)
z .......

111: Propeller Head Plaza, 33.92505% - Total Geek (0.00)
Posted by jphii on 2004-06-30, 14:50:57 (68.226.15.237)
Had to do it again just to check it! .......

112: Propeller Head Plaza, 31.55819% - Total Geek (0.00)
Posted by jphii on 2004-06-30, 14:41:13 (68.226.15.237)
Whoda thunkit! .......

113: ANK AudioKits Forum, Re: Audio Note AZ-Two loudspeakers (0.00)
Posted by jphii on 2004-06-30, 13:59:45 (68.226.15.237)
They are not there any more. I changed the whole room. Peter recommends putting them in corners, but I don't have that option. I now have them on the long wall, about 5' from the corners. And yes, I a .......

114: Vinyl Asylum, You're welcome, A few answers! (0.00)
Posted by jphii on 2004-06-27, 16:44:55 (12.129.82.193)
1. It does not fit into a standard Rega hole, which is 24mm. Pete includes a piece of pvc tubing and some sandpaper to ream out the hole. I had to make a new armboard, because I didn't want to screw a .......

115: Vinyl Asylum, Nothing now (0.00)
Posted by jphii on 2004-06-26, 19:13:30 (68.226.15.237)
The queen of the she-bitches just came home, so it was either "TURN IT DOWN" or shut it off. I shut it down to make life easier for me. One of these days her ass is out the door! .......

116: Vinyl Asylum, Re: Ricki Lee Jones sef titled on my new Spacedeck (0.00)
Posted by jphii on 2004-06-26, 18:46:45 (68.226.15.237)
That is one album I have to get. I really like her vocal ability!!! .......

117: Vinyl Asylum, 1. Yes, 2. Yes (0.00)
Posted by jphii on 2004-06-26, 18:21:30 (68.226.15.237)
But the one thing you want to look at is cost. The K&K step up tranny is as good if not better than the EAR, for about $250. Then again, the Bent Audio stuff is even better, but costs more, about a gr .......

118: Vinyl Asylum, NO!, Well, maybe.. (0.00)
Posted by jphii on 2004-06-26, 17:57:05 (68.226.15.237)
But I can't really say, because I'm well into the single malt! .......

119: Vinyl Asylum, Re: Gravity (0.00)
Posted by jphii on 2004-06-26, 17:55:08 (68.226.15.237)
I saw Chris' and it is MUCH nicer looking. The question is, for the extra hundred bucks, is it worth it? Now I must say, that if Chris came out with his first, I would have bought it. Maybe we need t .......

120: Vinyl Asylum, Gravity (0.00)
Posted by jphii on 2004-06-26, 17:43:00 (68.226.15.237)
That's what had me wondering about this thing. The arm just sits there. But I'll be damned if it doesn't work. I've been spinnin' for about 5 hours now, changing vta on every album. This thing just ge .......

121: Vinyl Asylum, Review: Pete Riggle Audio VTAF (0.00)
Posted by jphii on 2004-06-26, 14:38:11 (68.226.15.237)
Well, I've had this thing for over a month, and finally got around to getting it in today. After looking eveything over, I decided to just make another arm board for it. I used red coconut palm for th .......

122: Vinyl Asylum, Since you brought it up (0.00)
Posted by jphii on 2004-06-26, 13:37:43 (68.226.15.237)
I figured I might as well play the same album. It's an all time great. Also spun FZ Apostrophe', and SRV Soul to Soul. I also installed the Pete Riggle Audio VTAF, and am writing a review for here and .......

123: Vinyl Asylum, Re: Internal or external phonostage ..... & why ? (0.00)
Posted by jphii on 2004-06-26, 07:11:20 (68.226.15.237)
John, I agree that performance should be the main concern. That's why I bought the Supratek. It has been much better than the K&K trannies or the Tom Evans that I was using previously. And it LOOKS a .......

124: High Efficiency Speaker Asylum, Look at the kit forum, I saw it there first.... (0.00)
Posted by jphii on 2004-06-24, 07:47:25 (69.68.87.146)
and posted a reply. It's about AZ3's, but you mat like it. .......

125: ANK AudioKits Forum, Re: Audio Note AZ-Two loudspeakers (0.00)
Posted by jphii on 2004-06-24, 07:42:46 (69.68.87.146)
I've got a pair of AZ3's. I think they are a VERY GOOD speaker for the money. I think they retailed for 1600, but I bought mine from David Cope for 900. I think you would have to spend a lot more mone .......

126: Vinyl Asylum, Try a Denon (0.00)
Posted by jphii on 2004-06-13, 10:02:25 (68.226.15.237)
You can get a 103 for under $200, or a 103r for a little over $200. I like both better than the Goldring, but have no experience with the Ortofons. .......

127: Vinyl Asylum, What's spiining tonight? (0.00)
Posted by jphii on 2004-06-05, 18:03:12 (68.226.15.237)
I don't normally do the what's spinning threads, but my wife's not here tonight, so I GET TO JAM! SO, I'm sitting here listening to FZ "Absolutely Free", and once that is done, i'm going to play every .......

128: Vinyl Asylum, Yes (0.00)
Posted by jphii on 2004-06-05, 06:12:13 (68.226.15.237)
But you have to buy the cryo treated motor drive kit. It has a very low cost of $5000, and is guaranteed for 2 days. .......

129: Vinyl Asylum, Tower of Power (0.00)
Posted by jphii on 2004-06-05, 05:19:12 (68.226.15.237)
The first time I saw them was in Cleveland stadium in '75 with The Stones, J. Geils and Joe Vitales. What a show that was! I've seen them about 10 times since. They do put on a hell of a show! I wish .......

130: Vinyl Asylum, I've got one.... (0.00)
Posted by jphii on 2004-06-05, 05:09:03 (68.226.15.237)
And should be installing it this weekend. I made a new armboard because I didn't want to drill a bigger hole in my main board, built out of solid Macasser Ebony, and lead loaded. I'll start a post and .......

131: Vinyl Asylum, Shelter 201 (0.00)
Posted by jphii on 2004-06-03, 08:29:15 (65.40.107.115)
Has anyone heard it yet? I was wondering how it sounds compared to a De4non 103r. .......

132: Vinyl Asylum, Re: I had the same problem with my wife. But I solved it. (0.00)
Posted by jphii on 2004-05-20, 12:39:19 (65.40.107.115)
but it stopped the problem, didn't it!!! .......

133: Vinyl Asylum, Re: Denon 103 Series cartridge (0.00)
Posted by jphii on 2004-05-19, 19:09:28 (68.226.15.237)
I bought mine from Audiocubes II in Japan. $241 shipped to North Carolina. It is well worth going for the R. I agree with George, it will require bucks to beat it. Dynavector 17d2 or Shelter 501 are .......

134: Vinyl Asylum, What kind of TT? (0.00)
Posted by jphii on 2004-05-13, 10:29:42 (65.40.107.115)
Because this certainly makes a difference. Suspended and non-suspended tables react differently to isolation and coupling. Shame on all of you for not asking! .......

135: Vinyl Asylum, Teres/OL (0.00)
Posted by jphii on 2004-05-13, 10:21:56 (65.40.107.115)
Find the best deal on an OL modded rb250, then spend the rest on a Teres. .......

136: Vinyl Asylum, Yeah, no s^%t!!!! (0.00)
Posted by jphii on 2004-05-11, 18:45:44 (68.226.15.237)
I tried, it's up to you! .......

137: Vinyl Asylum, Re: Teres wood clamp - benefits are for real (0.00)
Posted by jphii on 2004-05-11, 10:16:16 (65.41.161.135)
Damn you! Now I'm going to have to add this to my list of things to make. .......

138: Vinyl Asylum, Re: Yes it is (0.00)
Posted by jphii on 2004-05-09, 12:30:29 (68.226.15.237)
As far as storage goes, it sits on a rack in the shop, or in a drawer in the veneer cabinet. I'm in North Carolina and while our humidity levels may be a little high, that doesn't come into play in th .......

139: Vinyl Asylum, Yes it is (0.00)
Posted by jphii on 2004-05-09, 06:58:50 (68.226.15.237)
I made a lead loaded board for my Teres. If you can work with wood, you can work with ebony. I had no problems what-so-ever machining it. .......

140: Vinyl Asylum, Re: Galen Carol - Good to do Business with? (0.00)
Posted by jphii on 2004-05-07, 06:24:52 (69.68.68.184)
You cannot go wrong with Galen. I've bought a ton of stuff from him, and his prices are great! He doesn't hose you on shipping either. .......

141: Vinyl Asylum, Re: Look here (0.00)
Posted by jphii on 2004-05-03, 16:47:56 (68.226.15.237)
John, I'm gonna get one too. Let us know what you think. Joe .......

142: Vinyl Asylum, Look here (0.00)
Posted by jphii on 2004-05-03, 14:22:06 (68.226.15.237)
This is it. I think I'm going to try one. .......

143: Vinyl Asylum, Re: Sowter or Lundahl transformers? (0.00)
Posted by jphii on 2004-05-02, 06:22:01 (68.110.136.242)
I used the Lundahl, and found it to be a very nice, especially for the money. I replaced it with the Tom Evans Microgroove for about a week. The I bought a Supratek. If funds are a concern, the K&K k .......

144: Vinyl Asylum, Re: Ueven Cartridge Output (0.00)
Posted by jphii on 2004-05-02, 06:10:09 (68.110.136.242)
Try adjusting azimuth. Your tip may not be perpendicular to the grooves. A little bit out will cause what you are experiencing. .......

145: Vinyl Asylum, Re: Wallytractor delivery????? (0.00)
Posted by jphii on 2004-05-01, 18:01:02 (68.226.15.237)
Get used to it. Wally has been: ill, backed up, busy, tired, etc.... We were extremely lucky to get our analog tool in only 2 months. I don't know how, since everything else from him is taking longer .......

146: Vinyl Asylum, I jumped! (0.00)
Posted by jphii on 2004-04-28, 16:59:54 (68.226.15.237)
I wanted to replace an old Fisher Studio deck, complete, for about 2k. Ended up building a Teres. Started with a K&K step up, then a Microgroove, now a Supratek preamp. Still upgrading and building ne .......

147: Vinyl Asylum, Re: Massive plinth: Source for lead shot? (0.00)
Posted by jphii on 2004-04-28, 16:50:46 (68.226.15.237)
T & T reloading, on the net. You need #9 chilled lead shot. It's about $25 for 25# shipped. At least to North Carolina. That's what I used in my Teres. Trust me, if you can't find it at a gun store in .......

148: Vinyl Asylum, Re: DENON 103R VS 103S OR 103D (0.00)
Posted by jphii on 2004-04-23, 06:05:28 (69.68.68.184)
Believe me, you will love the 103r, not just "tolerate" it. I like it better than the black. $241 shipped from Japan by Audiocubes II. .......

149: Amp/Preamp Asylum, 6c45Pi-e in Supratek Syrah phono stage (0.00)
Posted by jphii on 2004-04-20, 12:51:06 (69.68.68.184)
Ok all, I need a little help here. I do have a NOS quad that I put in, but what other tubes will work? This is one tube I'm not familiar with at all, and can find very little data. I searched here, bu .......

150: Tubes Asylum, Re: Sylvania 6L6GC STR387 questions (0.00)
Posted by jphii on 2004-04-19, 12:24:29 (69.68.68.184)
If you are going to sell them, give me an email! .......

151: Tubes Asylum, 6c45Pi-e in Supratek phono stage (0.00)
Posted by jphii on 2004-04-19, 12:19:37 (69.68.68.184)
Ok all, I need a little help here. I do have a NOS quad that I put in, but what other tubes will work? This is one tube I'm not familiar with at all, and can find very little data. I searched here, bu .......

152: Vinyl Asylum, How can you not? (0.00)
Posted by jphii on 2004-04-09, 10:44:28 (69.68.87.244)
I only wish I could see the tubes glowing in the Audio Note. But, that will change on Tuesday. My Supratek Syrah gets here! Then I'll at least have the tube glow from the preamp. Once the new rack get .......

153: Vinyl Asylum, Re: Good interconnect for phono preamp (0.00)
Posted by jphii on 2004-04-06, 15:20:17 (68.110.143.161)
Discovery. 80 bucks on Agon. Signature version $150 .......

154: Vinyl Asylum, Teres Teres Wooden Clamp Accessory (0.00)
Posted by jphii on 2004-04-03, 17:10:30 (68.110.143.161)
I thought about upgrading, and keep putting it off. I am in the process of building another Teres, this time out of red coconut palm. Gonna do a 2 or 3 arm version this time. I figured I'd make a matc .......

155: Vinyl Asylum, Re: dl 103 vs dl 103R (0.00)
Posted by jphii on 2004-04-03, 12:53:27 (68.110.143.161)
103r has a little more detail. Works fine on a rb300, I had it set up with one for a while. Now using an Origin Live OL1 (rb250). .......

156: Vinyl Asylum, Re: Cat Stevens Tea For The Tillerman (0.00)
Posted by jphii on 2004-03-31, 15:26:13 (68.110.143.161)
I like the original US over the Mofi. I also like the original Izitso over Mofi. Have em all. .......

157: Vinyl Asylum, Re: Designing an Armboard: Hard attachment, or decoupled? (0.00)
Posted by jphii on 2004-03-28, 14:22:23 (68.110.143.161)
One of those Teres is mine. I designed another arm board to sit on BBC ISocones. It gives me much more adjustability in every direction, and in comparison tests, sounds better too. I A/B'd both styles .......

158: Vinyl Asylum, Re: New Teres Pictures (0.00)
Posted by jphii on 2004-03-28, 05:03:32 (68.110.143.161)
Henry, Are you going to keep us guessing on how it sounds? Joe .......

159: Vinyl Asylum, Velvety nt (0.00)
Posted by jphii on 2004-03-24, 06:36:08 (69.68.87.244)
1 .......

160: Vinyl Asylum, Re: Disk Doctor Brushes with VPI 16.5 compatibility Questions (0.00)
Posted by jphii on 2004-03-23, 17:48:08 (68.110.143.161)
I use last brushes. $25 for a pack of 10. Look at Needle Doctor. They WORK! .......

161: Vinyl Asylum, Try Last brushes (0.00)
Posted by jphii on 2004-03-22, 19:17:13 (68.110.143.161)
from the Needle Doctor. 10 pack for $25. THEY WORK! .......

162: Vinyl Asylum, Re: Record cleaning machines (0.00)
Posted by jphii on 2004-03-21, 07:24:48 (68.110.143.161)
Having experience with only one, I must recommend it highly. I just got my VPI 16.5 3 days ago, and wonder how in the hell I ever lived without it. I've cleaned about 150 so far, and can not believe .......

163: Vinyl Asylum, Re: Just played my first 10cc album... (0.00)
Posted by jphii on 2004-03-19, 11:19:20 (69.68.87.244)
I bought 7 10cc albums off Agon for $14 shipped, all were in great shape. So good, in fact, that one was better than the copy I had that I though was mint. Love 10cc!! .......

164: Vinyl Asylum, Re: Upgrade TT, phono preamp or cartridge ? (0.00)
Posted by jphii on 2004-03-19, 11:14:27 (69.68.87.244)
Used K&K is right here, already set up for a 103. Email me. .......

165: Vinyl Asylum, Red Trumpet (0.00)
Posted by jphii on 2004-03-19, 06:59:07 (69.68.87.244)
works for me. They ship quick. .......

166: Vinyl Asylum, K&K (0.00)
Posted by jphii on 2004-03-18, 12:52:30 (69.68.87.244)
I've said it many times: Absolutely cannot be beat for the money. I would still be using mine, 'cept I got a great deal on a Micro Groove. Tell Kevin what your equiptment is, and you won't have to wor .......

167: Vinyl Asylum, Welcome back, but it does... (0.00)
Posted by jphii on 2004-03-18, 12:49:23 (69.68.87.244)
have to cost a fortune. Didn't you read the rules? Upgrade-itis will get you soon. But WTH, it's supposed to be FUN! If you need a step-up, I now have a K&K trannie that is not being used, with the si .......

168: Vinyl Asylum, I just bought (0.00)
Posted by jphii on 2004-03-18, 12:46:46 (69.68.87.244)
a Tom Evans Micro Goove+. It was listed, and 10 minutes later, it was sold, to me. I paid, went back to the ad to check on something, and the ad was gone. This was yesterday. It arrived today! I've ne .......

169: Vinyl Asylum, Look here (0.00)
Posted by jphii on 2004-03-18, 12:40:56 (69.68.87.244)
If this in your budget, you need to look at it. .......

170: Vinyl Asylum, NO! (0.00)
Posted by jphii on 2004-03-17, 19:11:07 (68.110.143.161)
z .......

171: Vinyl Asylum, Re: New turntable with removable interconnects (0.00)
Posted by jphii on 2004-03-16, 09:13:48 (69.68.87.244)
I would say that in this price range, the chances of finding removable interconnects are quite slim. .......

172: Vinyl Asylum, I second that... (0.00)
Posted by jphii on 2004-03-12, 17:31:02 (68.110.143.161)
After a lot of trial and error, I followed 4yanx advice to the letter. I finall broke down and bought a 16.5 this week, but I have been using RRL fluids by hand. THEY ARE BETTER THAN ANYTHING I TRIED! .......

173: Vinyl Asylum, Still disagree...Statement!!!! NT (0.00)
Posted by jphii on 2004-03-10, 16:52:03 (68.110.143.161)
z .......

174: Vinyl Asylum, Statement (0.00)
Posted by jphii on 2004-03-10, 12:31:15 (69.68.87.244)
i.e. somebody just placed a bet on the bay, which is a horse. .......

175: Vinyl Asylum, Try this (0.00)
Posted by jphii on 2004-03-10, 12:28:36 (69.68.87.244)
I used 1/2" x 20 threaded rod, cut to length. I made my own knob on top, and tapped out a solid copper cabinet knob for the bottom. You need to drill the hole all the way through the plinth and armboa .......

176: Tubes Asylum, Tubes in the Audio Note Soro SE Phone (pics) (0.00)
Posted by jphii on 2004-02-29, 10:09:44 (68.110.143.161)
Just thought I'd through this out. Some pictures of the new tubes. I changed them all. .......

177: Vinyl Asylum, New Teres pictures (0.00)
Posted by jphii on 2004-02-29, 09:57:29 (68.110.143.161)
I've put up 2 new pages. The links are on the index page. The first page is pics of the new arm board set up. The second is of the new tubes for the amp. P.S. Steve, I fixed the name of your link fina .......

178: Vinyl Asylum, I second this (0.00)
Posted by jphii on 2004-02-29, 06:32:39 (68.101.7.45)
I have the same setup including the K&K. I use a little higher ratio, though. .......

179: Vinyl Asylum, Re: Teres 265 - What Arm & Cartridge? (0.00)
Posted by jphii on 2004-02-27, 08:16:37 (69.34.68.189)
I just changed from a modded RB300 to an Origin Live OL1 with some mods. I use a Denon 103R. I also changed my armboard to a new one I made. 7/8" Cocobolo with small adjustable cones under it. With th .......

180: Vinyl Asylum, Re: British sports cars and vinyl (0.00)
Posted by jphii on 2004-02-27, 05:47:59 (69.34.68.189)
My home built Teres and a BMW 635CSi (1985). Not British, but I've had several in the past! .......

181: Vinyl Asylum, Re: For the fun of the exercise I'm thinking about building my own table (0.00)
Posted by jphii on 2004-02-23, 18:00:29 (68.110.143.161)
Try it, it's fun! .......

182: Vinyl Asylum, Audio Advisor (0.00)
Posted by jphii on 2004-02-20, 06:15:22 (69.34.68.189)
It's $449 there, the best price I've found, and they will ship free. .......

183: Vinyl Asylum, Re: The Unify’s pivot point to spindle (0.00)
Posted by jphii on 2004-02-17, 17:15:03 (68.110.143.161)
You might be able to get it ste up properly without moving it, but if at all possible, move it! .......

184: Vinyl Asylum, Corian (0.00)
Posted by jphii on 2004-02-16, 12:06:55 (69.34.68.189)
I am building a couple right now, but using Staron. It is a 100% acrylic solid surface countertop material very similar to Corian. If you knkow how to work it it is very easy. If not, it can be a bit .......

185: Vinyl Asylum, Re: What's your TT? Would you buy it again if doing over? (0.00)
Posted by jphii on 2004-02-15, 05:58:51 (68.110.143.161)
Well, if you've been following my posts, you can probably guess what I'll say. Teres. As a matter of fact, I am building svereal more right now. Once you set it up, which took me about 10 minutes, you .......

186: Vinyl Asylum, Re: How well doe's your turntable manufacturer look after you. (0.00)
Posted by jphii on 2004-02-13, 06:19:29 (69.34.68.189)
Very well, since it was me! Seriously, Chris Brady at Teres is all one can ask for. Has answered numerous stupid questions without hesitation. Highly recommended! .......

187: Vinyl Asylum, Never a problem, unlike ebay nt (0.00)
Posted by jphii on 2004-02-13, 06:16:37 (69.34.68.189)
z .......

188: Vinyl Asylum, Re: Which stepup transformer for Denon MC cartridge? (0.00)
Posted by jphii on 2004-02-13, 06:15:25 (69.34.68.189)
I use a K&K with my 103R. $250 if you build it yourself, about $300 if Kevin does it for you. I can say without hesitation that this is a giant killer. Go to the K&K forum on the main board for detail .......

189: Vinyl Asylum, Nice lookin' kit! (0.00)
Posted by jphii on 2004-02-11, 16:06:24 (68.110.143.161)
Enjoy while you can, before the upgrade bug bites you in the ass!!!! .......

190: Vinyl Asylum, NO, use zip cord :0 (0.00)
Posted by jphii on 2004-02-11, 16:04:08 (68.110.143.161)
The one thing you must remember: IT ALL STARTS AT THE WALL!!! If you can't get good power, you will never be able to maintain proper speed and RFI rejection. I second the notion: Demo a couple. See if .......

191: Vinyl Asylum, That pic spurred the only interest in audio my wife has shown! NT (0.00)
Posted by jphii on 2004-02-11, 16:00:11 (68.110.143.161)
z .......

192: Vinyl Asylum, Aw Doug, I'm glad someone read that post!!! NT (0.00)
Posted by jphii on 2004-02-11, 15:58:45 (68.110.143.161)
z .......

193: Vinyl Asylum, I want the wood platter too, but.. (0.00)
Posted by jphii on 2004-02-11, 11:49:30 (69.34.68.189)
To get going I went with the acrylic. I know how CB builds them (at least I think I do), and am going to give it a shot myself. Too much other TT stuff going on right now. Having some fun building the .......

194: Vinyl Asylum, Exactly, NO TOUCHING!!! NT (0.00)
Posted by jphii on 2004-02-11, 10:32:36 (69.34.68.189)
z .......

195: Vinyl Asylum, Doubt it, but you never know! NT (0.00)
Posted by jphii on 2004-02-11, 10:16:06 (69.34.68.189)
z .......

196: Vinyl Asylum, I got one, sorta kinda (0.00)
Posted by jphii on 2004-02-11, 10:03:29 (69.34.68.189)
See what I mean! .......

197: Vinyl Asylum, I got mine a week ago (0.00)
Posted by jphii on 2004-02-10, 06:13:25 (69.34.68.189)
and used the first hundred in a day. I didn't think any were like that, so I checked. All of mine fit fine. I wonder what happened? .......

198: Tubes Asylum, What's the stuff..... (0.00)
Posted by jphii on 2004-02-09, 07:32:09 (69.34.68.189)
you put on tube pins to clean them? Is it Caig? Where do you get it? TIA .......

199: Vinyl Asylum, Audio Cubes 2 = $241 shipped to the US (0.00)
Posted by jphii on 2004-02-05, 06:32:02 (69.34.68.189)
It's where I bought my 103r, which is what that price applies to. The regular 103 is less expensive. I looked for two weeks, best price out there. .......

200: Vinyl Asylum, Look over at the K&K board (0.00)
Posted by jphii on 2004-02-03, 12:35:43 (69.34.68.189)
If you can do diy, they have something you may be interested in. Since I have a Teres too, I can tell you that I really like their step-up tranny with my TT. But, in your case, they have a full functi .......

201: Vinyl Asylum, Look over at the K&K board (0.00)
Posted by jphii on 2004-02-03, 12:35:09 (69.34.68.189)
If you can do diy, they have something you may be interested in. Since I have a Teres too, I can tell you that I really like their step-up tranny. But, in your case, they have a fell function phone pr .......

202: Vinyl Asylum, Teres Update- After Week One (0.00)
Posted by jphii on 2004-01-31, 09:02:00 (68.110.143.161)
Hi all, I thought I'd let everybody know how it has been working so far, and the problems I've encountered along the way. First off, I had a very bad hum & background noise in Soro phono stage. I trac .......

203: Vinyl Asylum, Money, lot's of it! nt (0.00)
Posted by jphii on 2004-01-31, 09:00:46 (68.110.143.161)
z .......

204: Vinyl Asylum, I likes my Lundahl too!!! Call Kevin @ K&K nt (0.00)
Posted by jphii on 2004-01-29, 06:58:14 (69.34.68.189)
z .......

205: SET Asylum, Pretty sure it's a tube. (0.00)
Posted by jphii on 2004-01-27, 10:23:42 (69.34.68.189)
I opened it up to look at them, and there is one mismatched tube out of the 4. It looks like crap too! I ordered a new quad so I'll see sometime this week. The only place I get noise is when I select .......

206: Vinyl Asylum, Orig: Akron, OH. Now: Greenville, NC nt (0.00)
Posted by jphii on 2004-01-27, 05:53:07 (69.34.68.189)
z .......

207: Vinyl Asylum, Try it (0.00)
Posted by jphii on 2004-01-26, 18:14:57 (68.110.143.161)
I did. I like it. If the 103 works, so will the 103r .......

208: Vinyl Asylum, Being from "up North" originally.... (0.00)
Posted by jphii on 2004-01-26, 13:42:25 (68.110.143.161)
I had no ideas about this snow day stuff either. After 12 years in North Carolina, it has never ceased to amaze me that 2" of snow makes the governor declare a state of emergency. Havin' fun, though! .......

209: Vinyl Asylum, Re: A different kind of phono question (0.00)
Posted by jphii on 2004-01-26, 09:23:56 (68.110.143.161)
Try K&K audio. I don't know if it comes in silver, but the case is metal, so a can of spray paint will take care of that. They have a forum here on the main board, upper right corner is the link. It's .......

210: Vinyl Asylum, Snow day today in North Carolina, so..... (0.00)
Posted by jphii on 2004-01-26, 08:32:21 (68.110.143.161)
I am getting an extra 10 hours to spin some vinyl. Perfect timing, now three days running on the new Teres. Everything is starting to open up as the break in continues. Still waiting for a new quad of .......

211: Tubes Asylum, optional image url @ bottom of post box nt (0.00)
Posted by jphii on 2004-01-25, 12:49:14 (68.110.143.161)
z .......

212: Tube DIY Asylum, Can I use an E88CC in place of a 12AX7 in my phono (0.00)
Posted by jphii on 2004-01-25, 12:10:41 (68.110.143.161)
stage? TIA .......

213: Tubes Asylum, 12ax7 & e88cc (0.00)
Posted by jphii on 2004-01-25, 11:51:02 (68.110.143.161)
Can the e88cc's be used instead of 12ax7 in a phono stage? My Soro SE Phono has shitloads of noise in the phono stage. I've got a quad of tele e88cc, but no spare 12ax7. Need to know!!! TIA, Joe ::: T .......

214: SET Asylum, Hum in Audio Note Phono stage (0.00)
Posted by jphii on 2004-01-25, 10:11:59 (68.110.143.161)
My Sore SE Phono has a hum in the phono stage. The CD & tuner inputs are DEAD QUIET. COuld it be a bad tube? Joe .......

215: Vinyl Asylum, THanks! nt (0.00)
Posted by jphii on 2004-01-25, 08:43:01 (68.110.143.161)
z .......

216: Vinyl Asylum, Re: Very Very Nice! (0.00)
Posted by jphii on 2004-01-25, 08:40:59 (68.110.143.161)
I'm glad I built the platform. I found out my stand (lovan) is a piece of shit. SO, the platform definitely helps. If you can build one, do it. If you want me to build you one, email me. Joe ::: TOPIC .......

217: Vinyl Asylum, That is something I'm gonna try to build. nt (0.00)
Posted by jphii on 2004-01-25, 08:37:39 (68.110.143.161)
z .......

218: Vinyl Asylum, That's what I need for my hangover!!!!!!! nt (0.00)
Posted by jphii on 2004-01-25, 08:36:46 (68.110.143.161)
z .......

219: Vinyl Asylum, Thanks, but if someones guesses, I'll tell ;) nt (0.00)
Posted by jphii on 2004-01-25, 08:35:48 (68.110.143.161)
z .......

220: Vinyl Asylum, About 300 in wood & 80 hours nt (0.00)
Posted by jphii on 2004-01-25, 08:34:41 (68.110.143.161)
z .......

221: Vinyl Asylum, You could, but.... (0.00)
Posted by jphii on 2004-01-24, 17:40:20 (68.110.143.161)
Scott, Give some serious thought to the K&K step-up tranny. I have it, and for the money, NOTHING comes close. Joe .......

222: Vinyl Asylum, Playing now is...... (0.00)
Posted by jphii on 2004-01-24, 16:25:46 (68.110.143.161)
mofi Genesis "A Trick of the Tail" very loudly. Sqounk sounds too good to beleive. The only problem now is a little hum. Don't know if it is comin from the motor or the tube in the phono stage. Have .......

223: Vinyl Asylum, Don't even try (0.00)
Posted by jphii on 2004-01-24, 16:16:47 (68.110.143.161)
I did, and it was a waste of time. .......

224: Vinyl Asylum, I bought 'em (0.00)
Posted by jphii on 2004-01-24, 16:15:40 (68.110.143.161)
But the Vinyl God only knows when they will arrive. I'll post what I think when they do. Joe .......

225: Vinyl Asylum, Too loud, overpowers the music!! nt (0.00)
Posted by jphii on 2004-01-24, 15:47:56 (68.110.143.161)
z .......

226: Vinyl Asylum, Thanks! nt (0.00)
Posted by jphii on 2004-01-24, 15:11:39 (68.110.143.161)
z .......

227: Vinyl Asylum, Re: Teres is DONE! (0.00)
Posted by jphii on 2004-01-24, 15:11:12 (68.110.143.161)
Thanks Scott. I'll probably build another and sell it!!!!!!!!! Just kidding, of course. Unless the price is right, of course. .......

228: Vinyl Asylum, Re: BRAVO!! (0.00)
Posted by jphii on 2004-01-24, 15:09:52 (68.110.143.161)
Thanks. Be sure I'll let all know how the sound changes after break-in, tweaks, etc.... .......

229: Vinyl Asylum, Thanks! nt (0.00)
Posted by jphii on 2004-01-24, 15:09:01 (68.110.143.161)
z .......

230: Vinyl Asylum, Thanks! nt (0.00)
Posted by jphii on 2004-01-24, 15:08:32 (68.110.143.161)
z .......

231: Vinyl Asylum, Re: Very nice table!! let's get some wine but will you take that knife away first! (nt) (0.00)
Posted by jphii on 2004-01-24, 15:08:05 (68.110.143.161)
That's for tonight. The guys are coming over for "the unveiling" Got a couple different kinds of single malt and some good wine. Topped off by port & cigars on the deck (no smoking or pets in the ster .......

232: Vinyl Asylum, Re: A nitpick (0.00)
Posted by jphii on 2004-01-24, 13:42:43 (68.110.143.161)
That's only for the setup. The permanent one is teardrop shaped like the plinth, made out of ebony, with a mother of pearl inlay dot. Come now, after all this work you really didn't think I'd settle f .......

233: K&K Audio / Lundahl Transformers, Finally Got the step up installed (0.00)
Posted by jphii on 2004-01-24, 11:43:30 (68.110.143.161)
And I love it! .......

234: Vinyl Asylum, Teres is DONE! (0.00)
Posted by jphii on 2004-01-24, 11:17:30 (68.110.143.161)
OK boys & girls, here it is! Read the text at the top of the page. And no, I won't tell what I did that was so f@#%$g stupid. Now all I need to do is reroute the wires & ground it. Thanks to all of yo .......

235: Vinyl Asylum, I'd vote for drugs;) nt (0.00)
Posted by jphii on 2004-01-24, 10:27:16 (68.110.143.161)
z .......

236: Vinyl Asylum, Tonearm & wire (0.00)
Posted by jphii on 2004-01-24, 10:26:24 (68.110.143.161)
Steve, I got the arm all set. I over-reacted a little, it wasn't much of a problem. I think my problen now is that the tonearm wire is bad. The clips are not tight at all. It's been rewired, but I di .......

237: Vinyl Asylum, Now I'm Pi**ed! (0.00)
Posted by jphii on 2004-01-24, 10:12:56 (68.110.143.161)
Got it all together ok. Everything works fine and is all adjusted properly. But crap, I have to turn the volume past 12 o'clock to get any sound. I think I screwed the pooch building the K&K step-up. .......

238: Vinyl Asylum, Re: I have lost my mind ....! (0.00)
Posted by jphii on 2004-01-24, 10:08:57 (68.110.143.161)
Jim, If you want to get rid of any of the non-classical, give me a yell. I'm in North Carolina, so I could probably drive up and take a few off your hands! Joe .......

239: Vinyl Asylum, Teres update (0.00)
Posted by jphii on 2004-01-24, 05:30:11 (68.110.143.161)
Well, guess what. I put the arm on this am, and the damn thing sits on the platter. I mean, the bottom of the arm tube actually sits on the platter. Aslo, the platter sits about 1/2" off the plinth. S .......

240: Vinyl Asylum, Teres update (0.00)
Posted by jphii on 2004-01-24, 05:30:11 (68.110.143.161)
Well, guess what. I put the arm on this am, and the damn thing sits on the platter. I mean, the bottom of the arm tube actually sits on the platter. Aslo, the platter sits about 1/2" off the plinth. S .......

241: Vinyl Asylum, Teres Update (0.00)
Posted by jphii on 2004-01-23, 15:28:17 (68.110.143.161)
I got the new pics up. Almost there....... .......

242: Vinyl Asylum, Teres Update (0.00)
Posted by jphii on 2004-01-23, 15:28:17 (68.110.143.161)
I got the new pics up. Almost there....... .......

243: Vinyl Asylum, Not to be an idiot, but (0.00)
Posted by jphii on 2004-01-23, 15:02:58 (68.110.143.161)
ARe the grounds top or bottom. Thanks AnalogFan, Joe .......

244: Vinyl Asylum, Not to be an idiot, but (0.00)
Posted by jphii on 2004-01-23, 15:02:58 (68.110.143.161)
ARe the grounds top or bottom. Thanks AnalogFan, Joe .......

245: Vinyl Asylum, Need help quick! WIring Denon 103r (0.00)
Posted by jphii on 2004-01-23, 14:10:18 (68.110.143.161)
Ok, I'm setting the Teres up now and I'll have some hi-rez pics up tomorrow am. I got my Denon 103r from Japan. Of course, Japanese writing on the paperwork. I need to know what color leads go to whic .......

246: Vinyl Asylum, Need help quick! WIring Denon 103r (0.00)
Posted by jphii on 2004-01-23, 14:10:18 (68.110.143.161)
Ok, I'm setting the Teres up now and I'll have some hi-rez pics up tomorrow am. I got my Denon 103r from Japan. Of course, Japanese writing on the paperwork. I need to know what color leads go to whic .......

247: Vinyl Asylum, Re: Preventing static discharge in real time. (0.00)
Posted by jphii on 2004-01-20, 17:24:11 (68.110.143.161)
Cool idea. I just today bought two of them off ebay for s**ts & grins. Now I know what I'm going to do with one of them. .......

248: Vinyl Asylum, Teres Update & upgrade question (0.00)
Posted by jphii on 2004-01-20, 17:22:33 (68.110.143.161)
Yo. Just a quick update. The Teres is in the finish room now. I have 6 very thin coats of shellac on the bottom & sides. Tomorrow AM I'll turn it over and start on the top. I spent a while with 600 gr .......

249: SET Asylum, PING: Peter Q (0.00)
Posted by jphii on 2004-01-20, 17:08:16 (68.110.143.161)
I just got my manual for the Soro. Thanks so much! Joe .......

250: Vinyl Asylum, #6 is the best so far!! NT (0.00)
Posted by jphii on 2004-01-19, 20:04:58 (68.110.143.161)
z .......

251: Vinyl Asylum, Re: why blue anodised? (0.00)
Posted by jphii on 2004-01-19, 20:02:24 (68.110.143.161)
I came across that one for $5. I think brass would be better too. I made a brass washer about 3" dia to go between the arm board and plinth. A brass VTA nut would be a much better match. It will prob .......

252: Vinyl Asylum, Re: What did you use to glue the ebony veneer? (0.00)
Posted by jphii on 2004-01-19, 20:00:12 (68.110.143.161)
Hide glue, made from scratch. Any other way would be too easy! .......

253: Vinyl Asylum, Re: sure looks purty..... (0.00)
Posted by jphii on 2004-01-19, 19:59:30 (68.110.143.161)
Yep, ebony veneer. Should be putting the finish on tomorrow. Will keep y'all updated! I'll fix the link tomorrow too. .......

254: Vinyl Asylum, Teres update pictures fixed (0.00)
Posted by jphii on 2004-01-19, 16:28:05 (68.110.143.161)
Oops, my bad. I forgot to check the "url relative to page location" box. I think it's all fixed. .......

255: Vinyl Asylum, oops... (0.00)
Posted by jphii on 2004-01-18, 16:58:33 (68.110.143.161)
I made a base out of madura, a brazilian rosewood, so it looks like the 300 series. It weighs about 25 pounds, and I did it because I figure if CB puts one under the $6500 table, there's a reason for .......

256: Vinyl Asylum, Buy 'em (0.00)
Posted by jphii on 2004-01-18, 14:06:29 (68.110.143.161)
Then go out and get a TT. What's your budget? 45 & 33 are speeds in RPM. Pretty much anything will play both. If you don't buy 'em, I will ;) .......

257: Vinyl Asylum, Teres Update (0.00)
Posted by jphii on 2004-01-18, 13:38:52 (68.110.143.161)
Just pictures. It's almost done. Base, done. Arm board, done. Plinth, just a little more hand sanding before the finish goes on. After checking flatness with a surface plate and dial indicator, I foun .......

258: Vinyl Asylum, Answer & Joe's Teres update (0.00)
Posted by jphii on 2004-01-18, 13:05:52 (68.110.143.161)
I had a conversation (email) with CB about maple. He says cocobolo sounds better. Given the density of maple I wondered, but since he has done it and I have not, I'll take his word for it. That's the .......

259: Vinyl Asylum, Re: Everything was $0.50! (0.00)
Posted by jphii on 2004-01-12, 09:42:09 (69.34.148.65)
Where is he? I don't do classical so I wouldn't be infringing. .......

260: Vinyl Asylum, Thanks for the help (0.00)
Posted by jphii on 2004-01-11, 13:58:35 (68.110.143.161)
I hope I can get a few more before I finish. Joe .......

261: Vinyl Asylum, Look here (0.00)
Posted by jphii on 2004-01-11, 07:51:36 (68.110.143.161)
Just happened to be on the site when you posted. Joe .......

262: Vinyl Asylum, Question for Teres owners (0.00)
Posted by jphii on 2004-01-11, 07:43:49 (68.110.143.161)
As some of you may know, I am in the process of building one. I was wondering if thos out there who have one could help me out with 2 measurements. What is the height of your armboard, from the plinth .......

263: Vinyl Asylum, Yep nt (0.00)
Posted by jphii on 2004-01-10, 19:23:27 (68.110.143.161)
z .......

264: Vinyl Asylum, Different... (0.00)
Posted by jphii on 2004-01-10, 14:23:30 (68.110.143.161)
Types here and there. The plinth is cocobolo, with a large piece of macassar ebony inlaid on the top. The arm board is ebony, and the sub-base is madura, brazilian rosewood. the sides will get ebony v .......

265: Vinyl Asylum, 78's (0.00)
Posted by jphii on 2004-01-10, 08:47:44 (68.110.143.161)
Just an FYI. Those old 78's that are all beat to hell make great shellac. ALl you heve to do is soak them in denatured alchohol. .......

266: Vinyl Asylum, Teres Updat (0.00)
Posted by jphii on 2004-01-10, 08:46:00 (68.110.143.161)
Ok all, It's finall ready for finishing. I am going to dry fit all of the parts, disassemble, veneer, and finish it next week. Take a look... P.S. No bitching about freewebspace pop ups. It's FREE. :: .......

267: Vinyl Asylum, Re: Vintage vs. Modern turntable (Thorens vs. Scout) (0.00)
Posted by jphii on 2004-01-09, 08:44:18 (69.34.148.65)
Then again, there is always the Teres 135. .......

268: Vinyl Asylum, YES! nt (0.00)
Posted by jphii on 2004-01-07, 17:43:24 (68.110.143.161)
z .......

269: K&K Audio / Lundahl Transformers, Just got my MC Stepup (0.00)
Posted by jphii on 2004-01-07, 08:56:34 (69.34.148.65)
Today, ordered it YESTERDAY!!!! Thanks Kevin, once the system gets up, Ill let you know how I like it. I'm sure it will be great! .......

270: Vinyl Asylum, Re: What's a good low output budget MC cartridge? (0.00)
Posted by jphii on 2004-01-06, 15:09:15 (68.110.143.161)
Vinster, Audiocubes in Japan has the 103r for $241 shipped to the US. I think the 103 is about $30 less. Best prices I found. Just bought one, and they had it here in 4 days. .......

271: Vinyl Asylum, Teres 200 series Turntables (0.00)
Posted by jphii on 2004-01-06, 12:55:32 (69.34.148.65)
Glad to see you like it. I should have mine up and running in a week. .......

272: Vinyl Asylum, Audiopoints (0.00)
Posted by jphii on 2004-01-03, 07:29:24 (68.110.143.161)
Go to Agon browse page, click on star sound tech under links. They should have something that fits. Very high quality, very reasonable. You will notice a difference. .......

273: Vinyl Asylum, Re: Thorens Pic of the Day (0.00)
Posted by jphii on 2004-01-01, 15:32:20 (68.110.143.161)
OK, I have to ask for more info on the DIY 843p. It looks real good, and could match my tt project well. .......

274: K&K Audio / Lundahl Transformers, Does this mean...... (0.00)
Posted by jphii on 2004-01-01, 14:36:02 (68.110.143.161)
That I should wait to order my step up kit? The Teres is getting close to completion, and I am going to need it in about 2 weeks. I know when I called you tou said np to build it for me, but now I'm .......

275: Vinyl Asylum, Arlo Guthrie "Alice's Resteraunt" (0.00)
Posted by jphii on 2004-01-01, 12:55:03 (68.110.143.161)
I know it's better on Thanksgiving, but I didn't do it then, so I did it now. .......

276: Vinyl Asylum, Happy New Year to all!!! Teres update (0.00)
Posted by jphii on 2004-01-01, 08:53:13 (68.110.143.161)
Well, just wanted to let you all know that my Teres project is not dead in the water. It has been a most annoying holiday season here. Friends, relatives, it seems everone has been a pain in my ass fo .......

277: Vinyl Asylum, Re: Shavings from a power planer, looks like pine (nt). (0.00)
Posted by jphii on 2003-12-20, 12:07:06 (68.110.143.161)
Not pine, maple. It is from the doors to some library case getting built for our med school archives. .......

278: Vinyl Asylum, ANother Teres updat (0.00)
Posted by jphii on 2003-12-19, 14:18:03 (68.110.143.161)
Everything is ready to go together and be finished. Just waiting to get some lead shot this weekend to load the base. Just put a few more pics. .......

279: Vinyl Asylum, Re: Teres Day 3 update (0.00)
Posted by jphii on 2003-12-18, 05:40:40 (65.41.40.55)
No, I mean 3" wide, 1" thick, about 18" long. Yes there will be lead. Shellac is going on the old fashioned way, by hand, with each coat hand sanded with 220 grit paper. More work, but a MUCH nicer fi .......

280: Vinyl Asylum, Re: That's a sweet chunk of Brazilian (0.00)
Posted by jphii on 2003-12-18, 05:38:32 (65.41.40.55)
All of the wood you see I got at East Wake Hardwoods in Zebulon, NC. Roger has a fantastic selection of exotic woods, and his prices are unbeatable! .......

281: Vinyl Asylum, Re: Are you using gorilla glue for the plinth? (0.00)
Posted by jphii on 2003-12-18, 05:37:05 (65.41.40.55)
You can see NO glue lines. Believe me, if I thought there would be I would be using west sustems with an infusion method. That is what I plan to do when I build the platter. .......

282: Vinyl Asylum, Teres Day 3 update (0.00)
Posted by jphii on 2003-12-17, 18:00:52 (68.110.143.161)
OK, a few more pics are up. I got a lot done today, so there are only a few pics. All of the gluing is done except for the two pieces of the plinth. The base got it's fourth (of ten) coat of shellac. .......

283: Vinyl Asylum, Re: Teres build update (0.00)
Posted by jphii on 2003-12-17, 06:14:41 (65.41.40.55)
I'm trying to fix the site so it works a little better. I am MUCH BETTER at wood than the web! .......

284: Vinyl Asylum, Teres build update (0.00)
Posted by jphii on 2003-12-16, 17:31:13 (68.110.143.161)
I've got 15 or 20 pictures up on my site now. If you like boring pictures of wood layout, jointing, planing, milling, facing, gluing, etc... they are there. I'm going to try and update the site every .......

285: Vinyl Asylum, Also: user510 inside (0.00)
Posted by jphii on 2003-12-15, 16:33:45 (68.110.143.161)
Do you mind if I put a link up to your site? I've learned quite a bit there. .......

286: Vinyl Asylum, Started building the Teres today....... (0.00)
Posted by jphii on 2003-12-15, 16:24:43 (68.110.143.161)
And put up a few pictures of the wood I'm using on my site. It is going to be cocobolo & ebony. The top will have a 3.5"w x .750d ebony inlay running long ways, and the rest of the plinth is cocobolo. .......

287: Vinyl Asylum, Go with the Teres (0.00)
Posted by jphii on 2003-12-13, 08:37:43 (68.110.143.161)
The Teres is an even better deal if you build it yourself. I am in the process of doing so now. I bought the acrylic platter, bearing, motor, etc. from Chris for $1400. I have another $200 in wood. $ .......

288: Amp/Preamp Asylum, Trigger cable for Golden Theater (0.00)
Posted by jphii on 2003-12-12, 06:19:08 (65.41.190.162)
I have a Golden theater GTA amp and GT1 Processor. Where can I find a trigger cable to turn the amp on with the processor? TIA .......

289: Amp/Preamp Asylum, Re: Audio Note Soro SE Phono gain stage? (0.00)
Posted by jphii on 2003-12-11, 06:42:10 (65.40.230.231)
Peter, Here are the cartridge specs: Features Denon 103r Based on Denon DL-103's design Coil purity made from 99.9999% (6N) high purity copper wire Specifications Type: Moving coil Output voltage: 0.2 .......

290: Amp/Preamp Asylum, Re: Audio Note Soro SE Phono gain stage? (0.00)
Posted by jphii on 2003-12-11, 06:37:14 (65.40.230.231)
Peter, Is there any way to get a manual for this unit? Joe .......

291: Amp/Preamp Asylum, Audio Note Soro SE Phono gain stage? (0.00)
Posted by jphii on 2003-12-10, 13:49:16 (68.110.143.161)
Is there anyone put there who knows the gain for the phono and preamp sections of the Audio Note Soro SE Phono? I am trying to match K&K stepup trnny to my cartridge, and I figured it might be good to .......

292: Tubes Asylum, Re: 6dj8/6922/E88CC/ECC88/7308/2492 (0.00)
Posted by jphii on 2003-12-10, 09:57:27 (65.40.230.231)
Just wanted to thanks again. .......

293: Tubes Asylum, Re: Tube rolling on Audio Note Soro SE Phono (0.00)
Posted by jphii on 2003-12-09, 13:53:07 (68.110.143.161)
Thanks for the help. This should give me a few options to play with! .......

294: Tubes Asylum, Re: 6dj8/6922/E88CC/ECC88/7308/2492 (0.00)
Posted by jphii on 2003-12-09, 13:52:02 (68.110.143.161)
I'd be more than happy to try the Teslas. Shoot me an email with specifics. Thanks .......

295: High Efficiency Speaker Asylum, Re: Moth, Parker, ANote, or Omega? (0.00)
Posted by jphii on 2003-12-06, 12:10:50 (68.110.143.161)
Go with the Audio Notes. I've got AN3's and love 'em .......

296: Tubes Asylum, Tube rolling on Audio Note Soro SE Phono (0.00)
Posted by jphii on 2003-12-06, 12:04:31 (68.110.143.161)
OK, time to start playing with tubes: 4 - 5881 2 - 6sl7 2 - 12au7/ecc82 1 - ecc83/12ax7 1 - 6dj8/ecc88 Recommendations? I listen to all types of music, at all volumes. System: Soro SE Phono AN 2 CD Pl .......

297: Vinyl Asylum, Re: RB250 collar mount dimensions? Making Teres armboard. (0.00)
Posted by jphii on 2003-12-06, 11:50:24 (68.110.143.161)
As I am in the process of doing this also, the latest word from Chris is 1.65" total amd .8" at the armhole. .......

298: Cable Asylum, Audio Note Soro SE Power & Spkr Cables (0.00)
Posted by jphii on 2003-08-26, 12:52:09 (65.41.171.80)
Ok all, I just got my Soro SE Phono today, and need a little help in the power & speaker cable dept. I will be using ANV Silver interconnects. I'm at the end of my budget, but need good cables. HELP! .......

299: Inmate Systems, jphii's Joe's Home Theater (0.00)
Posted by jphii on 2003-03-21, 11:20:27 (65.40.89.228)
To add your system, you must register ."> Audio Asylum Inmate jphii's Joe's Home Theater System Home / FAQ / News Classifieds / Events .......

Found total of 299 records, Query: , Author: jphii in All Forums, Time: 0 sec.

New Search