|
Vintage Asylum: Re: Before you plug it in- you must? by Ron Oehlert Classic gear from yesteryear; vintage audio standing the test of time. |
For Sale Ads |
68.103.7.136
In Reply to: Before you plug it in- you must? posted by kach22i on September 22, 2004 at 13:56:52:
If it's good stuff, as a matter of course you should replace all electrolitic-type capacitors BEFORE powering it up. Brand-new power-supply capacitors also dispense with the need to bring up tube amps slowly. Electrolitic-type capacitors simply age-out due to their moist, acidic internal construction. If not too far gone, slow application of power via a Variac or the light-bulb method may re-form their electro-chemical insides for prolonged use, but instant full voltage will short thru aged filter caps that have not been used for quite some time and ruin them. Tube amps should always have a load (such as speakers) connected to the output whenever powered on, even if no input signal is present or a risk of shorts (and so ruin) in the output transformer exists. Sellers that state they have no means of testing but did plug it in to see if everything lights up may have seriously de-valued the item by just such internal shorts; replacement parts will either be expensive or not available. Check vacuum tube availability and cost before you buy.
This post is made possible by the generous support of people like you and our sponsors:
Topic - Before you plug it in- you must? - kach22i 13:56:52 09/22/04 ( 8)
- Re: Before you plug it in- you must? - Ron Oehlert 09/22/04 18:00:11 09/22/04 ( 3)
- Re: Before you plug it in- you must? - kach22i 10:24:56 09/23/04 ( 2)
- Re: Before you plug it in- you must? - Ron Oehlert 18:13:13 09/24/04 ( 1)
- Re: What I do. - kach22i 15:53:30 09/27/04 ( 0)
Re: Before you plug it in- you must? - Sherlock 15:08:43 09/22/04 ( 3)
- Re: Before you plug it in- you must? - Bold Eagle 15:53:55 09/22/04 ( 2)
- Please Explain - tesla 21:19:47 09/23/04 ( 1)
- Re: Please Explain - kach22i 16:07:09 09/27/04 ( 0)