|
Tube DIY Asylum: Yep... by restock Do It Yourself (DIY) paradise for tube and SET project builders. |
For Sale Ads |
70.28.248.66
In Reply to: I trust you know two inputs have reduced gain for use with high output sources(nt) posted by Russ57 on January 13, 2006 at 07:44:04:
Yes, my Fi Y has two inputs with reduced gain. Don uses resistors in series for the attenuation of these two inputs of only a few db. per Don's suggestion I could exchange the resistors for these two inputs to have more attenuation.Also, on the side: Don mentioned that he is usually listening around the 9 o'clock position as well (using a 2V source): The large gain of the Fi Y together with the input sensitivity of the X puts you in a regime where you do need strong attenuation for regular listening. I read in some post here that some people use the passive attenuator switch on the Fi X (if installed) to reduce the gain somewhat.
Many thanks,
Rene
"I wouldn't trust (no) words written on no piece of paper."
Jim Jarmusch, DEAD MAN 1995
This post is made possible by the generous support of people like you and our sponsors:
Topic - Stepped attenuator with low profile for Fi Y pre? - restock 17:25:53 01/11/06 ( 27)
- I trust you know two inputs have reduced gain for use with high output sources(nt) - Russ57 07:44:04 01/13/06 ( 1)
- Yep... - restock 01/13/06 10:30:36 01/13/06 ( 0)
Re: Stepped attenuator with low profile for Fi Y pre? - Dave Cigna 16:06:34 01/12/06 ( 1)
- Re: Stepped attenuator with low profile for Fi Y pre? - restock 10:43:34 01/13/06 ( 0)
So far two that should fit... - restock 12:52:01 01/12/06 ( 0)
You might try a law faked linear (Vishay/Sfernice cermet)(nt) - Russ57 12:14:16 01/12/06 ( 1)
- Completely agree with Russ - law faking - andy evans 14:30:55 01/12/06 ( 0)
Measuring the tracking differences... - restock 23:10:32 01/11/06 ( 5)
- Re: Measuring the tracking differences... - fatbottle 05:00:52 01/12/06 ( 4)
- To refresh yr memory... - cheap-Jack 07:36:11 01/12/06 ( 3)
- I must apologise for this , I'm being stalked by Cheap Jack.... - fatbottle 07:40:14 01/12/06 ( 2)
- Sorry, c-J stalked you, again ! - cheap-Jack 07:56:32 01/12/06 ( 1)
Re: Stepped attenuator with low profile for Fi Y pre? - dave slagle 18:28:40 01/11/06 ( 13)
- Re: Stepped attenuator with low profile for Fi Y pre? - restock 18:45:00 01/11/06 ( 12)
- Get to the root of the problem - too much gain. - cheap-Jack 09:18:17 01/12/06 ( 0)
- Re: Stepped attenuator with low profile for Fi Y pre? - dave slagle 19:09:59 01/11/06 ( 2)
- YES ! - cheap-Jack 07:47:33 01/12/06 ( 0)
- Re: Stepped attenuator with low profile for Fi Y pre? - restock 20:57:09 01/11/06 ( 0)
Re: Stepped attenuator with low profile for Fi Y pre? - GEO 19:00:43 01/11/06 ( 7)
- Re: Stepped attenuator with low profile for Fi Y pre? - restock 21:05:14 01/11/06 ( 3)
- Re: Stepped attenuator with low profile for Fi Y pre? - GEO 05:53:02 01/12/06 ( 2)
- Re: Stepped attenuator with low profile for Fi Y pre? - restock 08:25:49 01/12/06 ( 1)
- Re: Stepped attenuator with low profile for Fi Y pre? - kyle 12:58:07 01/12/06 ( 0)
Re: Stepped attenuator with low profile for Fi Y pre? - restock 21:02:26 01/11/06 ( 0)
Re: Stepped attenuator with low profile for Fi Y pre? - dave slagle 20:38:40 01/11/06 ( 1)
- Re: Stepped attenuator with low profile for Fi Y pre? - GEO 05:51:17 01/12/06 ( 0)