|
Tube DIY Asylum: Re: Looking for a GOOD 211 / VT4-C Schematic by Gary Kaufman Do It Yourself (DIY) paradise for tube and SET project builders. |
For Sale Ads |
68.169.16.110
In Reply to: Looking for a GOOD 211 / VT4-C Schematic posted by Super_BQ on July 17, 2003 at 23:47:58:
Don't believe everything you read about high B+ and transmitting triodes. Many folks have been using 845's at low B+ with good results.I played around with 211's and finally settled on a B+ of 825v, 60ma as an operating point. It gave me all of the power I needed and sounded wonderful. It also allowed me to use some "reasonable sized" 15uf/1000v oil caps instead of a few much larger parts I had.
I was more impressed at the sonic differences made by altering the current than the B+. Also the power supply made a substantial difference - liberal use of swinging/smoothing chokes and smallish oil caps sounded way better than larger banks of electrolytics. I'm not sure the 866jr's made any sonic difference, but they sure looked better!
My circuit is very similar to PAE's (see link below)
The single stage driver is sweet and works well.
Mikey's FS-100's are fantastic.
This post is made possible by the generous support of people like you and our sponsors:
Topic - Looking for a GOOD 211 / VT4-C Schematic - Super_BQ 23:47:58 07/17/03 ( 22)
- Re: Looking for a GOOD 211 / VT4-C Schematic - Jim Doyle 10:54:55 07/18/03 ( 3)
- Re: Looking for a GOOD 211 / VT4-C Schematic - Super_BQ 13:54:30 07/18/03 ( 2)
- Re: Looking for a GOOD 211 / VT4-C Schematic - Jim Doyle 20:03:26 07/18/03 ( 1)
- Re: Looking for a GOOD 211 / VT4-C Schematic - Super_BQ 22:26:41 07/18/03 ( 0)
Re: Looking for a GOOD 211 / VT4-C Schematic - Gary Kaufman 07/18/03 08:14:38 07/18/03 ( 2)
- Re: Looking for a GOOD 211 / VT4-C Schematic - Super_BQ 13:48:34 07/18/03 ( 1)
- Re: Looking for a GOOD 211 / VT4-C Schematic - Gary Kaufman 05:29:08 07/19/03 ( 0)
Re: Looking for a GOOD 211 / VT4-C Schematic - Lightning 07:49:08 07/18/03 ( 4)
- Re: Looking for a GOOD 211 / VT4-C Schematic - Super_BQ 13:19:55 07/18/03 ( 3)
- Re: Looking for a GOOD 211 / VT4-C Schematic - Lightning 18:10:02 07/18/03 ( 2)
- Re: Looking for a GOOD 211 / VT4-C Schematic - Super_BQ 19:43:05 07/18/03 ( 1)
- Re: Looking for a GOOD 211 / VT4-C Schematic - Lightning 21:19:38 07/18/03 ( 0)
Re: Looking for a GOOD 211 / VT4-C Schematic - mrfixit 04:03:36 07/18/03 ( 5)
- Re: Looking for a GOOD 211 / VT4-C Schematic - Super_BQ 12:59:01 07/18/03 ( 4)
- Neither! - mrfixit 05:44:12 07/21/03 ( 0)
- Re: Looking for a GOOD 211 / VT4-C Schematic - Paul Barker 01:27:49 07/19/03 ( 2)
- Re: Looking for a GOOD 211 / VT4-C Schematic - Super_BQ 02:19:59 07/19/03 ( 1)
- Re: Looking for a GOOD 211 / VT4-C Schematic - Paul Barker 06:02:25 07/19/03 ( 0)
Re: Looking for a GOOD 211 / VT4-C Schematic - Paul Barker 00:20:54 07/18/03 ( 3)
- Re: Looking for a GOOD 211 / VT4-C Schematic - Super_BQ 00:57:17 07/18/03 ( 2)
- Re: Looking for a GOOD 211 / VT4-C Schematic - Super_BQ 01:17:14 07/18/03 ( 1)
- Re: Looking for a GOOD 211 / VT4-C Schematic - Paul Barker 01:02:43 07/19/03 ( 0)