Tube DIY Asylum: Re: Confessions of a plate choke convert & a few CCS questions (long) by Doug Flynn Do It Yourself (DIY) paradise for tube and SET project builders.

For Sale Ads FAQ / News / Events

Posted by Doug Flynn on June 3, 2002 at 14:28:45

In Reply to: Re: Confessions of a plate choke convert & a few CCS questions (long) posted by 7N7 on June 3, 2002 at 03:04:00:

Hi 7N7

I should have pointed out that I dropped the B+ when I inserted the plate choke so that it used the same operating point as the resistors. I used a B+ of approx 350V for the resistor, so it was operating in a fairly linear part of the curves. I also tried higher load resistors, but they all had the same "sound".

I intend trying other drivers in place of the 6V6. Thanks for your reply.

Doug

This post is made possible by the generous support of people like you and our sponsors:

The Cable Cooker

---

[ Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2024, Audio Asylum, all rights reserved ]

---

[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]

---