Welcome! Need support, you got it. Or share your ideas and experiences.
82.162.96.2
In Reply to: Ella p-2-p posted by bcherry on December 16, 2004 at 03:44:39:
Brian, thank you for the picture, it is really helpful.Please note -- Connection missing --Left Channel-- Tube 2-- Pin 5 to 47K resistor.
Wrong connection -- Right Channel Tube 2 -- 1 MOhm resistor connected to pin 8, but have to be connected to the pin 1.Notice for those, who already have assembled ELLA and will redo it P-to-P --Power tubes (marked A,B,C,D in manual)-- Tubes A&C "default" (according to the manual) connected to P2G2, Tube B&D connected to P1G1.
So, if you would not like to reassemble the output stage, you have to change wires, coming from 0.01 uF capacitors through 1 KOhm resistors to pins 5 of power tubes.Further, Input tube on the left channel have "changed" pins -- input is pin 2, (the "second tube"), not the pin 7 ("first tube" -- as in the right channel).
Regards,
Victor Androsenko
Topic - Ella p-2-p - bcherry 03:44:39 12/16/04 ( 10)
- I know nothing, but this doesn't seem right - Dibble 04:45:38 12/22/04 ( 2)
- Dual triode - duh! - Dibble 19:38:09 12/22/04 ( 1)
- Re: Dual triode - duh! - bcherry 22:00:26 12/23/04 ( 1)
Re: Ella p-2-p - Victor_A 12/17/04 21:00:41 12/17/04 ( 2)
- Ella p-2-p corrected and enhanced - bcherry 01:39:23 12/20/04 ( 0)
Re: Ella p-2-p - bcherry 22:57:41 12/17/04 ( 0)
Re: Ella p-2-p - Olaf Zenker 02:46:08 12/17/04 ( 1)
- Re: Ella p-2-p - zarniwoop 16:53:51 12/17/04 ( 0)
Re: Ella p-2-p - Brian D 22:29:02 12/16/04 ( 1)
- Re: Ella p-2-p - bcherry 22:59:23 12/17/04 ( 0)