Home Cable Asylum

Interconnects, speaker wire, power cords. Ask the Cable Guys.

RE: no AC plug, no socket

paco said:
"well, it's not really hardwire, if by that we understand soldering; those screw connectors are really easy to use, and very common here among electricians"

Here in the US it is considered hard wired if a plug and receptacle is not used to connect the power cord to the branch circuit wiring.

paco said:
"as for polarity, of course i checked it, but i did it before connecting, to determine live, neutral and earth"

The correct AC polarity I am talking about is the AC Line hot and neutral polarity orientation connection to the IEC connector on the power cord.

You used the black and red conductors of the power cord for the current carrying Line conductors. Which one, color, did you use for the neutral? I assume the color you picked is connected to the neutral contact on the IEC connector.

FWIW, here is the US the white color conductor would be used for the neutral conductor. One of the other conductors would be used for the hot. More than likely the black conductor. The red would be used for the EGC, (Equipment Grounding Conductor), and marked continuously with green marking tape the entire length of exposed area beyond the jacket of the cord.




This post is made possible by the generous support of people like you and our sponsors:
  Sonic Craft  


Follow Ups Full Thread
Follow Ups

FAQ

Post a Message!

Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.