Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
I finally got around to starting my ROK B12-GH project, cleaned and lubed, painted top plate, mounted Jelco ST-250 arm. Before building a plinth I mounted the table in the cheesy plinth it came with, long story short the platter looks like it took a hit and is slightly bent at the lower edge of the inner rim, you can hear it on sustained piano notes, very slight but still there. You can also see as it spins some slight wobble to the platter when eyeballed.
My question is what other ROK platters will fit on the B12-GH? Maybe it could be machined but it would throw the balance of the platter off? Thanks in advance for responses.
Phill
This post is made possible by the generous support of people like you and our sponsors:
Topic - Rek O Kut Platter - philltubes 10:46:50 09/5/09 (3)
- You will want to keep the center spindle piece. - tubesforever 13:42:36 09/5/09 (0)
- RE: Rek O Kut Platter - cactuscowboy@bresnan.net 11:04:04 09/5/09 (1)
- RE: Rek O Kut Platter - philltubes 10:56:09 09/6/09 (0)