Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
Thought you might like this from 1958. It's the mark two so the knobs and colour may different. The input specs are: phono 8-1200mv, radio & tape 80mv, mic 4mv - no impedance though. Power requirements are said to be 320v @ 380ma and 6.3v @2A. To match the "modern" MM cartridge standard of 47k you may have to add a resistor across the input.
Before you get a Stanton check the output, as I found them a bit too low for my Leak mono pre-amp. A Shure M3D with a 78 retip ought to suit your 4HF, or a Pickering 380 even better as it has loads more volts, and they're more in keeping with your setup.
The only downside with a good vintage mono system is that I mostly play Stereo LPs (and CDs) on it. My main stereo system has more facilities for 78s and monos.
Keep us posted with your progress.
Best wishes
This post is made possible by the generous support of people like you and our sponsors:
Topic - For ffrr and your Armstrong - richardz 05:03:42 03/9/08 (0)