Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
I just mounted my new OC-9 on my Moerch UP-4 red dot arm. When setting VTF on the Shure scale the cantilever compresses to the point where the bottom of the cartidge body belly's down (touching the Shure scale) onto the Shure and then begins to give you a reading of VTF. When playing a record the bottom of the cartridge body is very close to the record. Have other users of the OC-9 experienced this? Thanks in advance for your response.Phill
This post is made possible by the generous support of people like you and our sponsors:
Topic - AT OC-9 MLII Question - philltubes 13:39:25 04/7/07 (8)
- Either you've got a defective cartridge or you're using way too much VTF..... - John Elison 14:27:33 04/7/07 (2)
- Re: Either you've got a defective cartridge or you're using way too much VTF..... - philltubes 15:28:38 04/7/07 (1)
- Re: Either you've got a defective cartridge or you're using way too much VTF..... - bjh 16:29:33 04/7/07 (0)
- You must have one of the "ferrous" Shure gauges. - HenryH 13:46:17 04/7/07 (1)
- Re: You must have one of the "ferrous" Shure gauges. - nightdoggy 18:23:17 04/7/07 (0)
- Some Shure SFG-2 scales are defective! - anumber1 13:45:48 04/7/07 (2)
- Re: Some Shure SFG-2 scales are defective! - philltubes 13:52:50 04/7/07 (1)
- Suspension wire? - nightdoggy 18:25:47 04/7/07 (0)