Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
In Reply to: Two Mc-240s posted by Mike33 on August 10, 2002 at 21:04:30:
Mike,The MC240 is designed to produce 80 watts in mono at .5% distortion. Please see an ownwer's manual for the connection. It will also run 600 ohm and 70 volt outs through the multi pin connector. If you are going to run these in mono they need to be in tip top shape with a well matched set of tubes. If they have not had new caps installed and the voltages are not on the exact schematic values do not bother as 'the distortion will go through the roof' as mentioned above.
Ron-C
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Two Mc-240s - Ron-C 08/11/0221:14:24 08/11/02 (0)