Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
In Reply to: testing 36KD6/40KD6 posted by Lew on November 4, 2013 at 10:57:13:
Hi, Lew. 6KD6 same except for heater voltage. 6LF6 is very close and has same Duodecar basing and each type has same pin out. If you can dial up
36/40 V for heater I'd give it a go. 6/36/40KD6 NOS availability is
spotty. I'm trying it tied as a triode P-P.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: testing 36KD6/40KD6 - elektron 11/4/1311:33:02 11/4/13 (21)
- Follow-up: The laugh's on me - Lew 16:10:45 11/9/13 (0)
- That may be the problem - Lew 12:49:32 11/4/13 (19)
- I meant to ask you,did you change the tube sockets in the amps? - Michael Samra 22:43:56 11/4/13 (1)
- Yes... - Lew 07:35:26 11/5/13 (0)
- I ended up creating my own "recipe" to test the 36/40KD6 on my Hickok 752A... - Steve O 13:24:30 11/4/13 (16)
- RE: I ended up creating my own "recipe" to test the 36/40KD6 on my Hickok 752A... - Lew 13:34:25 11/4/13 (15)
- RE: I ended up creating my own "recipe" to test the 36/40KD6 on my Hickok 752A... - Steve O 15:58:56 11/4/13 (0)
- A tube tester will not tell if those tubes are noisy or not. - Michael Samra 15:21:58 11/4/13 (13)
- RE: A tube tester will not tell if those tubes are noisy or not. - Lew 16:19:58 11/4/13 (7)
- RE: A tube tester will not tell if those tubes are noisy or not. - Michael Samra 16:13:34 11/5/13 (6)
- RE: A tube tester will not tell if those tubes are noisy or not. - Steve O 17:20:22 11/5/13 (5)
- One thing I am certain of, now... - Lew 12:06:40 11/7/13 (0)
- RE: A tube tester will not tell if those tubes are noisy or not. - Michael Samra 17:48:40 11/5/13 (3)
- Will send schematic pdf tonight - Lew 12:03:35 11/7/13 (0)
- RE: A tube tester will not tell if those tubes are noisy or not. - Steve O 21:18:12 11/5/13 (1)
- RE: A tube tester will not tell if those tubes are noisy or not. - Michael Samra 22:41:10 11/5/13 (0)
- Were it only so simple... - Steve O 16:17:36 11/4/13 (4)
- RE: Were it only so simple... - Michael Samra 22:09:59 11/4/13 (3)
- Model 3 was never direct drive - Lew 07:23:50 11/5/13 (0)
- RE: Were it only so simple... - Steve O 05:25:44 11/5/13 (1)
- "full-range" amplifiers - Lew 07:29:28 11/5/13 (0)