Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
In Reply to: HELP ! Mc275CE : Hum/noise on one channel posted by emile on February 11, 2004 at 17:24:05:
Emile,The best way to fix this is to have a technician check it with a scope probe. It could be a bad solder, cap, or diode. You can check all of the tube voltages using a schematic. What do you find, DC with no signal? You may need to order the schematic from the factory in Binghamton.
Ron-C
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: HELP ! Mc275CE : Hum/noise on one channel - Ron-C 02/15/0414:31:11 02/15/04 (1)
- Re: HELP ! Mc275CE : Hum/noise on one channel - emile 05:15:37 02/20/04 (0)