Home Tube DIY Asylum

Do It Yourself (DIY) paradise for tube and SET project builders.

Re: Eggsactly!

Hi, Josh,
I suggest that you buy an used Wadia DAC.
A Wadia X32 will cost you less than $400 and outputs 4 Volts with a very low output impedance. It sounds much better than most low cost current CDPs.
You will be able to get rid of the 1:4 input tranny. Install the S&B inside the amp as input volume controls, or better still, use a pair of the MAGNETICS GURU autoformers, they sound much better than S&B, because there is no galvanic isolation. Frequency response is earthquake to bat whistle.
In case you are wondering, the Mag Guru is Dave Slagle.
I have made two preamps with his autoformers, they beat hands down a DIY Berman 76/6SN7 preamp, a DIY battery 7308 tube preamp and several commercial tube preamps.
I have never heard better sound from an attenuator, and I have tried most of them: Alps, Goldpoint, TKD, Dact, etc.
Standard disclaimer: I have no affiliation with Dave besides admiration for his fine work.
Carlos
from Rio de Janeiro, Brazil


This post is made possible by the generous support of people like you and our sponsors:
  Schiit Audio  


Follow Ups Full Thread
Follow Ups


You can not post to an archived thread.