In Reply to: RE: It depends on the model posted by tvr2500m on October 11, 2008 at 09:17:42:
Exact height depends on how you set the spikes.
The photo above shows the stands with a pair of Advents on them.
A link to a photo of a single stand is included below. It has a Leak 2060 perched on it and you can see the E II on the floor beside it with its small 2" factory stand removed.
The 4 way tapered stands with mitred corners were relatively hard to build. A 2 way front and back taper with butted corners would be much simpler and a simple rectangular cross section would be simpler still.David
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: It depends on the model - energyandair 10/12/0811:08:03 10/12/08 (0)