In Reply to: LIne-Source: What is the best Ribbon / Tweeter which has > 95 DB/1watt ? posted by Frank on October 19, 2002 at 11:46:14:
I think you're going to have a tough time finding something that meets that criteria. The only think I've seen is the Raven R-1, here are the specs:ribbon material pure aluminum
ribbon mass .008g
ribbon area 595 mm2
gap flux 0.55 Tesla
transformer, secondary impedance 0.05 W
transformer, primary impedance 4 W
DCR 3.3 W
frequency range 2000 - 35000Hz
sensitivity 95 dB / 2.83V / 1m
power handling, nominal 15W
power handling, maximum 40W
total mass 4.5 lbsZalytron sells them for $200 - which is still pretty hefty if you're making a line array, but it's probably one of the best tweeters you could use.
Good Luck!
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Ribbon Tweeter which has > 95 DB/1watt - chillysalsa 10/20/0207:30:18 10/20/02 (0)